index.xsl cps.xml http://types.lonmark.org 0000000000000000-0 http://types.lonmark.org http://types.lonmark.org/templates Standard 00:00:00:00:00:00:00:00-0 index.html Report Generator 4.01.07 Configuration Properties 0

14.00

6.00

12/13/2012 18:20:12 tech@lonmark.org no 0 0 0 0 0 0 0 0 0,00000 0,0 0,0 22 SNVT_amp_ac_mil

lamp_current_high

SNVT_amp_ac_mil

lamp_current_low

SNVT_amp_ac_mil

main_current_high

SNVT_amp_ac_mil

main_current_low

SNVT_volt_ac

lamp_voltage_high

SNVT_volt_ac

lamp_voltage_low

SNVT_volt_ac

main_voltage_high

SNVT_volt_ac

main_voltage_low

SNVT_pwr_fact

power_factor_low

SNVT_power

power_high

SNVT_power

power_low

SCPTOLCLimits

text("%d %d %d %d %d %d %d %d %f %f %f", lamp_current_high, lamp_current_low, main_current_high, main_current_low, lamp_voltage_high, lamp_voltage_low, main_voltage_high, main_voltage_low, power_factor_low, power_high, power_low) SFPToutdoorLuminairController no 0 0:0:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTactFbDly

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTopenLoopActuator no DCM_SPEED_CONST 1 SNVT_dev_c_mode

SCPTactuatorCharacteristic

text("%m") SFPThvacValvePositioner no 00*31 31 SNVT_str_asc

SCPTactuatorType

text("%s", ascii) SFPTdamperActuator SFPTfireSmokeDamperActuator SFPThvacValvePositioner no AHAM_CLOTHES_WASHER 1 -1 6 67 0 aham_appl_t

SCPTahamApplianceModel

text("%m") SFPTclothesWasherDomestic no 0,000 100,000 100,000 2 SNVT_lev_percent

SCPTairTemp1Alrm

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0,000 100,000 100,000 2 SNVT_lev_percent

SCPTairTemp1Day

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0,000 100,000 100,000 2 SNVT_lev_percent

SCPTairTemp1Night

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0 0:0:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTalrmClrT1

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no 0 0:0:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTalrmClrT2

SCPTalrmIhbT

SCPTalrmSetT1

SCPTalrmSetT2

SCPTareaDuctHeat

text("%f") text("%f", *10.7639+0(0:884)) SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 0,00 2 SNVT_sound_db

SCPTaudOutput

text("%f") SFPTaudibleFireIndicator no 0,0 0 2 SNVT_switch

SCPTaudibleLevel

text("%f %d", value, state) SFPTelevatorVoiceAnnouncer no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTautoAnswer

text("%m") SFPTmodemController no 0 RVU_NONE 0 6 SNVT_reg_val

SCPTbaseValue

text("%d %m %d", raw, unit, nr_decimals) SFPTutilityDataLoggerRegister SFPTutilityMeter no 0 0 0 0 4

unsigned short

0 23 255 1 0 0 1

hour_on

unsigned short

0 59 1 0 0 1

minute_on

unsigned short

0 23 255 1 0 0 1

hour_off

unsigned short

0 59 1 0 0 1

minute_off

SCPTbkupSchedule

text("%d %d %d %d", hour_on, minute_on, hour_off, minute_off) SFPToutdoorLuminairController no 0 2 SNVT_time_hour

SCPTblockProtectionTime

text("%d") SFPThvacValvePositioner no 0,0 0 2 SNVT_switch

SCPTbrightness

text("%f %d", value, state) SFPTelevatorDirectionLantern SFPTelevatorHallLantern SFPTelevatorPositionIndicator no 25 2 SNVT_press_p

SCPTbuildingStaticPressureSetpoint

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no 0 0 0 0 0 0 6

unsigned short

0 255 1 0 0 1

red

unsigned short

0 255 1 0 0 1

green

unsigned short

0 255 1 0 0 1

blue

on_color

unsigned short

0 255 1 0 0 1

red

unsigned short

0 255 1 0 0 1

green

unsigned short

0 255 1 0 0 1

blue

off_color

SCPTbuttonColor

text("%d %d %d %d %d %d", on_color.red, on_color.green, on_color.blue, off_color.red, off_color.green, off_color.blue) SFPTisiKeypad no BTA_TOGGLE_STATE 0,0 2 -1 41 68 0 button_action_t

action

unsigned short

1 255 0 1 0 0 1

scene_number

unsigned short

0 64 255 1 0 0 1

group_number

unsigned short

0 200 255 5 -1 0 ~~0.5~~

value

unsigned short

0 180 255 2 0 0 2

angle

setting

SCPTbuttonHoldAction

text(("%m ", action),((action == 1) ? ("%d ", setting.scene_number) :((action == 3) ? ("%d ", setting.scene_number) :((action == 15) ? ("d ", setting.angle) :((action == 16) ? ("%d ", setting.angle) :((action == 17) ? ("%d ", setting.angle) :((action == 20) ? ("%d ", setting.scene_number) :((action == 34) ? ("%d ", setting.group_number) :((action == 35) ? ("%d ", setting.group_number) :((action == 36) ? ("%d ", setting.group_number) :((action == 255) ? ("UNKNOWN ") :("%f ", setting.value)))))))))))) no BTA_TOGGLE_STATE 0,0 2 -1 41 68 0 button_action_t

action

unsigned short

1 255 0 1 0 0 1

scene_number

unsigned short

0 64 255 1 0 0 1

group_number

unsigned short

0 200 255 5 -1 0 ~~0.5~~

value

signed short

-90 90 127 1 0 0 1

angle

setting

SCPTbuttonPressAction

unsigned long

0 65534 65535 1 0 0 1

SCPTbuttonRepeatInterval

text("%d") SFPTisiKeypad no 0 2 SNVT_time_min

SCPTbypassTime

text("%f") SFPTchilledCeilingController SFPTdischargeAirController SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTsunblindController SFPTunitVentilatorController no 300,0 2 SNVT_time_sec

SCPTclOffDelay

text("%f") SFPTconstantLightController no 0,0 2 SNVT_time_sec

SCPTclOnDelay

text("%f") SFPTconstantLightController no 0 2

signed long

-32768 32767 1 0 0 1

SCPTclockCalibration

text("%d") no DCM_SPEED_CONST 1 SNVT_dev_c_mode

SCPTcombFlowCharacteristic

text("%m") SFPThvacValvePositioner no 0 1

unsigned short

0 200 1 0 0 1

SCPTcontrolPriority

text("%d") no 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 8 SNVT_lev_percent

x1Value

SNVT_lev_percent

y1Value

SNVT_lev_percent

x2Value

SNVT_lev_percent

y2Value

SCPTcontrolSignal

text("%f %f %f %f", x1Value, y1Value, x2Value, y2Value) SFPThvacValvePositioner no 0,000 100,000 2 SNVT_lev_percent

SCPTcontrolTemperatureWeighting

text("%f") no 10,00 35,00 10,00 2 SNVT_temp_p

SCPTcoolLowerSP

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTthermostat no -40,00 48,80 7,20 2 SNVT_temp_p

SCPTcoolSetpt

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTchiller no 10,00 35,00 10,00 2 SNVT_temp_p

SCPTcoolUpperSP

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTthermostat no 10,00 2 SNVT_temp_p

SCPTcoolingLockout

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTcoolingResetEnable

text("%m") SFPTdischargeAirController no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTcurrentSenseEnable

text("%m") no 10,00 2 SNVT_temp_p

SCPTcutOutValue

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerThermostat no 0/0,0/0,0 6

unsigned short

1 31 0 1 0 0 1

day_1

unsigned short

1 12 0 1 0 0 1

month_1

unsigned short

0 31 0 1 0 0 1

day_2

unsigned short

0 12 0 1 0 0 1

month_2

unsigned long

0 65535 0 1 0 0 1

event_mode_index

SCPTdayDateIndex

text("%d/%d,%d/%d,%d", day_1, month_1, day_2, month_2, event_mode_index) SFPTrealTimeBasedScheduler no 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 2 SNVT_state

SCPTdayNightCntrl

text("%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d", bit0, bit1, bit2, bit3, bit4, bit5, bit6, bit7, bit8, bit9, bit10, bit11, bit12, bit13, bit14, bit15) text("%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d", bit0, bit1, bit2, bit3, bit4, bit5, bit6, bit7, bit8, bit9, bit10, bit11, bit12, bit13, bit14, bit15) SFPTrefrigDisplayCaseControllerThermostat no 0,0 2 SNVT_time_sec

SCPTdebounce

text("%f") SFPTisiOccupancySensor SFPToccupancySensor no 00*4 yes text("%d") SFPTisiLampActuator SFPTisiSunblindActuator no 00*4 yes text("%d") SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTentryExit SFPThvacValvePositioner SFPTisiKeypad SFPTlampActuator SFPTopenLoopActuator SFPTopenLoopSensor SFPTscheduler no 0,000 2 SNVT_lev_percent

SCPTdefScale

text("%f") SFPTvariableSpeedMotorDrive no 0,0,0,0,0,0,0 14

unsigned long

0 65535 1 0 0 1

time_event_index

SCPTdefWeekMask

text("%d,%d,%d,%d,%d,%d,%d", time_event_index[0], time_event_index[1], time_event_index[2], time_event_index[3], time_event_index[4], time_event_index[5], time_event_index[6]) text("%d|%d|%d|%d|%d|%d|%d", time_event_index[0], time_event_index[1], time_event_index[2], time_event_index[3], time_event_index[4], time_event_index[5], time_event_index[6]) SFPTrealTimeBasedScheduler no 25,2 1

unsigned short

0 250 255 4 -1 0 ~~0.40000000596046~~

SCPTdefaultAutoPanSpeed

text("%f") no PAN_STOP 100,0 TILT_STOP 100,0 ZOOM_STOP 100,0 6 SNVT_ptz

SCPTdefaultPanTiltZoomSpeeds

text("%m %f %m %f %m %f", pan_dir, pan_speed, tilt_dir, tilt_speed, zoom, zoom_speed) no SET_OFF 0,0 0,00 4 SNVT_setting

SCPTdefaultSetting

text("%m %f %f", function,setting,rotation) SFPTsunblindController yes SSE_OFF 0 3 SNVT_sec_state

SCPTdefaultState

text("%m %d", state,identity) no 0,0 0 2 SNVT_switch

SCPTdefltBehave

text("%f %d", value, state) SFPTchiller no 0 1

unsigned short

0 255 255 1 0 0 1

SCPTdefrostCycles

text("%d") no 0,00 50,00 0,00 2 SNVT_temp_diff_p

SCPTdefrostDetect

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) no 0 2 SNVT_time_min

SCPTdefrostFanDelay

text("%d") no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTdefrostHold

text("%m") no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTdefrostInternalSchedule

text("%m") no DFM_MODE_FORCED 1 SNVT_defr_mode

SCPTdefrostMode

text("%m") SFPTrefrigDisplayCaseControllerDefrost no 0 2 SNVT_time_min

SCPTdefrostRecoveryTime

text("%d") no 0:0 23:59 0:0 7 SNVT_time_stamp

SCPTdefrostStart

text("%d:%d", hour, minute) text(time(hour, minute)) no 0,0 2 SNVT_time_sec

SCPTdelayTime

text("%f") SFPTentryExit SFPTsceneController SFPTscheduler no 0,00 2 SNVT_temp_p

SCPTdeltaNight

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPTrefrigDisplayCaseControllerThermostat no 00*31 31 SNVT_str_asc

SCPTdevListDesc

text("%s", ascii) SFPTdeviceMonitor no 0UNKNOWN 7 -1 2 81 0 address_type_t

address_type

unsigned short

1 255 1 0 0 1

subnet

no 1 0 0 1 1 0 0 1

unused

no 7 1 1 127 1 0 0 1

node

unsigned short

0 255 1 0 0 1

subnet

unsigned char

0 255 1 0 0 1

nid

SCPTdevListEntry

text(("%m", address_type),((address_type == 1) ? ("%d/%d", sn.subnet, sn.node) :((address_type == 2) ? ("%d/%x-%x-%x-%x-%x-%x", ni.subnet, ni.nid[0], ni.nid[1], ni.nid[2], ni.nid[3], ni.nid[4], ni.nid[5]) :("UNKNOWN")))) SFPTdeviceMonitor no 0 1

unsigned short

0 255 1 0 0 1

SCPTdevMajVer

text("%d") SFPTnodeObject no 0 1

unsigned short

0 255 1 0 0 1

SCPTdevMinVer

text("%d") SFPTnodeObject no DCM_SPEED_CONST 1 SNVT_dev_c_mode

SCPTdeviceControlMode

text("%m") SFPTpumpController no 0 2

unsigned long

0 65535 0 1 0 0 1

SCPTdeviceGroupID

text("%d") no OLC_DEFAULT 1 -1 4 82 0 olc_select_t

SCPTdeviceOutSelection

text("%m") SFPToutdoorLuminairController no 00*31 31 SNVT_str_asc

SCPTdialString

text("%s", ascii) SFPTtelephoneDirectory no 0,00 2 SNVT_temp_p

SCPTdiffNight

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPTrefrigDisplayCaseControllerThermostat no 5,00 2 SNVT_temp_diff_p

SCPTdiffTempSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPTdischargeAirController no 0,00 2 SNVT_temp_p

SCPTdiffValue

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPTrefrigDisplayCaseControllerThermostat no 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 2 SNVT_state

SCPTdirection

text("%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d", bit0, bit1, bit2, bit3, bit4, bit5, bit6, bit7, bit8, bit9, bit10, bit11, bit12, bit13, bit14, bit15) text("%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d|%d", bit0, bit1, bit2, bit3, bit4, bit5, bit6, bit7, bit8, bit9, bit10, bit11, bit12, bit13, bit14, bit15) SFPTdamperActuator SFPTfireSmokeDamperActuator no 13,00 2 SNVT_temp_p

SCPTdischargeAirCoolingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 10,00 2 SNVT_temp_p

SCPTdischargeAirDewpointSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 10,00 2 SNVT_temp_p

SCPTdischargeAirHeatingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 0,0 2 SNVT_time_sec

SCPTdrainDelay

text("%f") SFPTrefrigDisplayCaseControllerDefrost no 0 17:59:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTdriveT

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTopenLoopActuator no 150,0 2 SNVT_time_sec

SCPTdriveTime

text("%f") SFPTdamperActuator SFPTfireSmokeDamperActuator SFPThvacValvePositioner no 13,1070 2 SNVT_area

SCPTductArea

text("%f") SFPTairVelocitySensor SFPTdamperActuator SFPTdischargeAirController SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTvariableAirVolume no 1500 2 SNVT_press_p

SCPTductStaticPressureLimit

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no 500 2 SNVT_press_p

SCPTductStaticPressureSetpoint

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no -1 1 1 -1 1 1 8

signed long

-1 3000 -1 1 0 0 1

year

unsigned short

1 12 1 0 0 1

month

unsigned short

1 31 1 0 0 1

day

start

signed long

-1 3000 -1 1 0 0 1

year

unsigned short

1 12 1 0 0 1

month

unsigned short

1 31 1 0 0 1

day

end

SCPTeffectivePeriod

text("%d %d %d %d %d %d", start.year, start.month, start.day, end.year, end.month, end.day) SFPTcalendar SFPTscheduler no 00*4 yes text("%d") SFPTentryExit no 0,000 100,000 100,000 2 SNVT_lev_percent

SCPTemergencyPosition

text("%f") SFPThvacValvePositioner no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 no 1 0 0 1 1 0 0 1

lamp_current_high

no 1 1 0 1 1 0 0 1

lamp_current_low

no 1 2 0 1 1 0 0 1

main_current_high

no 1 3 0 1 1 0 0 1

main_current_low

no 1 4 0 1 1 0 0 1

lamp_voltage_high

no 1 5 0 1 1 0 0 1

lamp_voltage_low

no 1 6 0 1 1 0 0 1

main_voltage_high

no 1 7 0 1 1 0 0 1

main_voltage_low

no 1 0 0 1 1 0 0 1

power_factor_low

no 1 1 0 1 1 0 0 1

OLC_temp_high

no 1 2 0 1 1 0 0 1

power_high

no 1 3 0 1 1 0 0 1

power_low

no 1 4 0 1 1 0 0 1

relay_failure

no 1 5 0 1 1 0 0 1

cap_failure

no 1 6 0 1 1 0 0 1

lamp_failure

no 1 7 0 1 1 0 0 1

ballast_failure

no 1 0 0 1 1 0 0 1

inter_com_failure

no 1 1 0 1 1 0 0 1

exter_com_failure

no 1 2 0 1 1 0 0 1

main_volt_below_spec

no 1 3 0 1 1 0 0 1

lamp_restart_count

no 1 4 0 1 1 0 0 1

fading_ready

no 1 5 0 1 1 0 0 1

ballast_temp_high

no 1 6 0 1 1 0 0 1

digi_in_A

no 1 7 0 1 1 0 0 1

digi_in_B

no 1 0 0 1 1 0 0 1

bit_25_res

no 1 1 0 1 1 0 0 1

bit_26_res

no 1 2 0 1 1 0 0 1

bit_27_res

no 1 3 0 1 1 0 0 1

bit_28_res

no 1 4 0 1 1 0 0 1

bit_29_res

no 1 5 0 1 1 0 0 1

bit_30_res

no 1 6 0 1 1 0 0 1

bit_31_res

no 1 7 0 1 1 0 0 1

bit_32_res

no 1 0 0 1 1 0 0 1

bit_33_res

no 1 1 0 1 1 0 0 1

bit_34_res

no 1 2 0 1 1 0 0 1

bit_35_res

no 1 3 0 1 1 0 0 1

bit_36_res

no 1 4 0 1 1 0 0 1

bit_37_res

no 1 5 0 1 1 0 0 1

bit_38_res

no 1 6 0 1 1 0 0 1

bit_39_res

no 1 7 0 1 1 0 0 1

bit_40_res

SCPTenableStatusMsg

text("%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d", lamp_current_high, lamp_current_low, main_current_high, main_current_low, lamp_voltage_high, lamp_voltage_low, main_voltage_high, main_voltage_low, power_factor_low, OLC_temp_high, power_high, power_low, relay_failure, cap_failure, lamp_failure, ballast_failure, inter_com_failure, exter_com_failure, main_volt_below_spec, lamp_restart_count, fading_ready, ballast_temp_high, digi_in_A, digi_in_B) SFPToutdoorLuminairController no 0 2 SNVT_elec_kwh

SCPTenergyCntInit

text("%d") SFPTisiLampActuator SFPTlampActuator no 25,000 2 SNVT_lev_percent

SCPTexhaustEnablePosition

text("%f") SFPTdischargeAirController no 0,0 1,0 2 SNVT_time_sec

SCPTfadeTime

text("%f") SFPTsceneController no 10,000 2 SNVT_lev_percent

SCPTfanDifferentialSetpoint

text("%f") SFPTdischargeAirController no 0 1

unsigned short

0 1 255 1 0 0 1

SCPTfanInEnable

text("%d") SFPTdataLogger no HVF_CONTINUOUS 1 -1 4 53 0 fan_operation_t

SCPTfanOperation

SCPTfieldCalib

text("%d") SFPTlightSensor no FN_UNDEFINED 1 SNVT_fire_indcte

SCPTfireIndicate

text("%m") SFPTaudibleFireIndicator SFPTuniversalFireIndicator SFPTvisibleFireIndicator no FI_UNDEFINED 1 SNVT_fire_init

SCPTfireInitType

text("%m") SFPTuniversalFireInitiator no 00*31 FF*30-00 00*31 31 SNVT_str_asc

SCPTfireTxt1

text("%s", ascii) SFPTaudibleFireIndicator SFPTpullStationFireInitiator SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTthermalFireInitiator SFPTuniversalFireIndicator SFPTuniversalFireInitiator SFPTvisibleFireIndicator no 00*31 FF*30-00 00*31 31 SNVT_str_asc

SCPTfireTxt2

SCPTfireTxt3

SCPTflashFreq

text("%f") SFPTvisibleFireIndicator no 0,000 0,000 2 SNVT_lev_percent

SCPTfreeCoolPosition

text("%f") SFPThvacValvePositioner no 1/1 4 SNVT_muldiv

SCPTgain

text("%d/%d", multiplier, divisor) SFPTairVelocitySensor SFPTclosedLoopSensor SFPTglobalSolarRadiation SFPTopenLoopSensor no 1,0000 2 SNVT_multiplier

SCPTgainVAV

text("%f") SFPTvariableAirVolume no 1,0000 2 SNVT_multiplier

SCPTgainVAVHeat

text("%f") SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 0,0000000 0,0000000 0 31 SNVT_geo_loc

SCPTgeoLocation

text("%f %f %f %s", longitude, latitude, elevation, name) SFPTnodeObject no 10,00 35,00 10,00 2 SNVT_temp_p

SCPTheatLowerSP

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTthermostat no -40,00 93,00 35,00 2 SNVT_temp_p

SCPTheatSetpt

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTboilerController SFPTchiller no 10,00 35,00 35,00 2 SNVT_temp_p

SCPTheatUpperSP

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTthermostat no 20,00 2 SNVT_temp_p

SCPTheatingLockout

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTheatingResetEnable

text("%m") SFPTdischargeAirController no 0,0 2 SNVT_time_sec

SCPThighLimDefrDly

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0,0 2 SNVT_time_sec

SCPThighLimDly

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0,00 2 SNVT_temp_p

SCPThighLimTemp

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerThermostat no 00*4 yes text("%d") SFPTchannelMonitor SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor SFPTutilityDataLoggerRegister no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPThighLimit1Enable

text("%m") SFPTchannelMonitor no 00*4 yes text("%d") SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPThighLimit2Enable

text("%m") no 1,0 30,0 2 SNVT_time_sec

SCPTholdTime

text("%f") SFPTentryExit SFPTisiOccupancySensor SFPToccupancyController no 0,000 2 SNVT_lev_percent

SCPThumSetpt

text("%f") SFPTdischargeAirController SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTunitVentilatorController no HVAC_COOL 1 SNVT_hvac_mode

SCPThvacMode

text("%m") SFPTchiller no HVT_GENERIC 1 SNVT_hvac_type

SCPThvacType

text("%m") SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 00*4 yes text("%d") SFPTchannelMonitor SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no 00*4 yes text("%d") SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no 00*4 yes text("%d") SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no 00*4 yes text("%d") SFPTchannelMonitor SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor yes 0 2

unsigned long

0 65535 1 0 0 1

SCPTidentity

text("%d") no 00*31 31 SNVT_str_asc

SCPTifaceDesc

text("%s", ascii) SFPTchannelMonitor no 0 0:0:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTinFbDly

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator SFPTlampActuator no 0,0 2 SNVT_time_sec

SCPTinjDelay

text("%f") SFPTrefrigDisplayCaseControllerDefrost no 0/0/0 0:0:0 7 SNVT_time_stamp

SCPTinstallDate

text("%d/%d/%d %d:%d:%d", year, month, day, hour, minute, second) text(date(year, month, day), (" "), time(hour, minute, second)) SFPTaudibleFireIndicator SFPTfireSmokeDamperActuator SFPThvacValvePositioner SFPTpullStationFireInitiator SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTthermalFireInitiator SFPTuniversalFireIndicator SFPTvisibleFireIndicator no 0 2

unsigned long

0 65535 65535 1 0 0 1

SCPTinstalledLevel

text("%d") SFPTelevatorArrivalGong SFPTelevatorHallLantern no ST_OFF 1 SNVT_lev_disc

SCPTinvrtOut

text("%m") SFPTclosedLoopSensor SFPTopenLoopSensor SFPTuniversalFireInitiator no 0,0 2 SNVT_power

SCPTlampPower

text("%f") SFPToutdoorLuminairController no 0 0 0 0 0 0 0 0 8

unsigned short

0 255 1 0 0 1

flags

SCPTlightingGroupEnable

text("%d %d %d %d %d %d %d %d", flags[0], flags[1], flags[2], flags[3], flags[4], flags[5], flags[6], flags[7]) SFPTisiKeypad SFPTisiLampActuator SFPTisiSunblindActuator no 0 0 0 0 0 0 0 0 8

unsigned short

0 255 1 0 0 1

flags

SCPTlightingGroupMembership

text("%d %d %d %d %d %d %d %d", flags[0], flags[1], flags[2], flags[3], flags[4], flags[5], flags[6], flags[7]) no 0 2 SNVT_ppm

SCPTlimitCO2

text("%d") SFPTroofTopUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTunitVentilatorController no 0,000 160,000 100,000 2 SNVT_lev_percent

SCPTlimitChlrCap

text("%f") SFPTchiller no 0 0 2 SNVT_switch

SCPTlinkPowerDetectEnable

text("%d %d", value,state) SFPTchannelMonitor no 0,000 0 0,000 0 6 SNVT_load_offsets

SCPTloadControlOffset

text("%f %d %f %d", standby_offset, standby_rotation, demand_response_offset, demand_response_rotation) SFPTisiLampActuator SFPTisiSunblindActuator no 00*31 31 SNVT_str_asc

SCPTlocation

text("%s", ascii) SFPTaudibleFireIndicator SFPTautomaticTransferSwitch SFPTboilerController SFPTchilledCeilingController SFPTchiller SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTclothesWasherDomestic SFPTconstantLightController SFPTdamperActuator SFPTdischargeAirController SFPTelevatorArrivalGong SFPTelevatorDirectionLantern SFPTelevatorFireSystemsPort SFPTelevatorHallLantern SFPTelevatorPositionIndicator SFPTelevatorVoiceAnnouncer SFPTentryExit SFPTfanCoilUnit SFPTfireSmokeDamperActuator SFPTgeneratorSet SFPTheatPump SFPThvacValvePositioner SFPTidentifierSensor SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator SFPTlampActuator SFPTlightSensor SFPTlightingPanelController SFPTnodeObject SFPToccupancyController SFPToccupancySensor SFPTopenLoopActuator SFPTopenLoopSensor SFPTpartitionWallController SFPTpressureSensor SFPTpullStationFireInitiator SFPTpumpController SFPTrailcarAudioController SFPTrailcarAudioSensor SFPTrefrigDisplayCaseControllerDefrost SFPTrefrigDisplayCaseControllerEvaporator SFPTrefrigDisplayCaseControllerThermostat SFPTroofTopUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccCommandModule SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTscenePanel SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTspaceComfortController SFPTsunblindActuator SFPTsunblindController SFPTswitch SFPTthermalFireInitiator SFPTthermostat SFPTunitVentilatorController SFPTuniversalFireIndicator SFPTuniversalFireInitiator SFPTutilityMeter SFPTvariableAirVolume SFPTvariableSpeedMotorDrive SFPTvisibleFireIndicator no 95,5 1

unsigned short

0 200 255 5 -1 0 ~~0.5~~

SCPTlogAlarmThreshold

text("%f") SFPTdataLogger no 0 4

unsigned quad

1 4294967295 0 1 0 0 1

SCPTlogCapacity

text("%d") SFPTdataLogger no 0 v0.0 0 0 0 0,00 0 0,00 20

unsigned long

2049 2049 1 0 0 1

file_type

unsigned short

1 1 1 0 0 1

major_version_number

unsigned short

0 0 1 0 0 1

minor_version_number

unsigned long

0 65534 65535 1 0 0 1

log_number

s32_type

0 2147483646 2147483647 1 0 0 1

record_count

SNVT_time_stamp_p

start_time

SNVT_time_stamp_p

end_time

SCPTlogFileHeader

text("%d v%d.%d %d %d %d %f %d %f", file_type, major_version_number, minor_version_number, log_number, record_count, start_time.second, start_time.hundredths, end_time.second, end_time.hundredths) no 00*4 yes text("%d") SFPTdataLogger no 00*4 yes text("%d") SFPTdataLogger no 0 4

unsigned quad

0 4294967294 4294967295 1 0 0 1

SCPTlogMinDeltaTime

text("%d") SFPTdataLogger no 00*4 yes text("%d") SFPTdataLogger no 45,0 1

unsigned short

0 200 255 5 -1 0 ~~0.5~~

SCPTlogNotificationThreshold

text("%f") SFPTdataLogger no 0 0 0 0 0 0 0 0,00 SINGLE_INPUT NO_FANIN 0 NO_POINT_STATUS 16 no 2 0 0 3 1 0 0 1

timestamp_type

no 3 2 0 3 1 0 0 1

record_type

no 1 5 0 1 1 0 0 1

multiple_input

no 1 6 0 1 1 0 0 1

fan_in

no 1 7 0 1 1 0 0 1

point_status

unsigned short

0 255 1 0 0 1

data_length

SNVT_time_stamp_p

timestamp

unsigned long

0 65534 65535 1 -2 0 ~~0.0099999997764826~~

offset_stamp

time

unsigned short

1 255 0 1 0 0 1

member_index

signed long

0 32767 -1 1 0 0 1

data_source_index

-1 5 73 0 log_status_t

log_status

s32_type

-2147483648 2147483647 0 1 0 0 1

value

SNVT_time_stamp_p

old_time

data

-1 4 77 0 point_status_t

point_status_value

SCPTlogRecord

text(("%d %d %d %d %d %d ", timestamp_type, record_type, multiple_input, fan_in, point_status, data_length),((timestamp_type == 0) ? ("%d %f ", time.timestamp.second, time.timestamp.hundredths) :((timestamp_type == 1) ? ("%f ", time.offset_stamp) :((timestamp_type == 2) ? ("NO_TIMESTAMP ") : ("UNKNOWN ")))), ((multiple_input == 1) ? ("%d ", member_index) :("SINGLE_INPUT ")),((fan_in == 1) ? ("%d ", data_source_index) :("NO_FANIN ")),((record_type == 0) ? ("%d ", data.value) : ((record_type == 1) ? ("%m ", data.log_status) :((record_type == 2) ? ("%d %f ", data.old_time.second, data.old_time.hundredths) :("UNKNOWN ")))), ((point_status == 1) ? ("%m ", point_status_value) :("NO_POINT_STATUS"))) no 0 0 0 0,00 8

unsigned short

1 255 0 1 0 0 1

dlap_version

unsigned long

1 65535 0 1 0 0 1

requested_log

SNVT_time_stamp_p

last_time

SCPTlogRequest

text("%d %d %d %f", dlap_version, requested_log, last_time.second, last_time.hundredths) no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 16

unsigned short

0 255 1 0 0 1

log_record

unsigned short

0 255 1 0 0 1

closest_version

unsigned long

1 65535 0 1 0 0 1

number_of_logs

response

SCPTlogResponse

text("%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d", response.log_record[0], response.log_record[1], response.log_record[2], response.log_record[3], response.log_record[4], response.log_record[5], response.log_record[6], response.log_record[7], response.log_record[8], response.log_record[9], response.log_record[10], response.log_record[11], response.log_record[12], response.log_record[13], response.log_record[14], response.log_record[15]) no 0 4

unsigned quad

0 4294967294 4294967295 1 0 0 1

SCPTlogSize

text("%d") SFPTdataLogger no 1 1

unsigned short

0 1 255 1 0 0 1

SCPTlogTimestampEnable

text("%d") SFPTdataLogger no LT_CIRCULAR 3 LT_CIRCULAR 1 -1 2 74 0 log_type_t

SCPTlogType

text("%m") SFPTdataLogger no 0,0 2 SNVT_time_sec

SCPTlowLimDly

text("%f") SFPTrefrigDisplayCaseControllerThermostat no 0,00 2 SNVT_temp_p

SCPTlowLimTemp

SCPTlowLimit1Enable

text("%m") SFPTchannelMonitor no 00*4 yes text("%d") SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTopenLoopActuator SFPTopenLoopSensor no BOOL_FALSE 1 -1 1 41 0 boolean_t

SCPTlowLimit2Enable

text("%m") no 0 2 SNVT_lux

SCPTluxSetpoint

text("%d") SFPTconstantLightController no 0/0/0 0:0:0 7 SNVT_time_stamp

SCPTmaintDate

text("%d/%d/%d %d:%d:%d", year, month, day, hour, minute, second) text(date(year, month, day), (" "), time(hour, minute, second)) SFPTaudibleFireIndicator SFPTfireSmokeDamperActuator SFPTpullStationFireInitiator SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTthermalFireInitiator SFPTuniversalFireIndicator SFPTuniversalFireInitiator SFPTvisibleFireIndicator no 0 2 SNVT_time_min

SCPTmanOvrTime

text("%f") SFPTchilledCeilingController SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTunitVentilatorController no 0/0/0 0:0:0 7 SNVT_time_stamp

SCPTmanfDate

unsigned short

0 1 1 0 0 1

SCPTmanualAllowed

text("%d") SFPTlightingPanelController SFPTrealTimeKeeper no 1 1

unsigned short

0 1 1 0 0 1

SCPTmasterSlave

text("%d") SFPTrealTimeKeeper no 0 1

unsigned short

0 255 1 0 0 1

SCPTmaxCameraPrepositions

text("%d") no 0 2 SNVT_time_min

SCPTmaxDefrostTime

text("%d") no -100,00 150,00 0,00 2 SNVT_temp_p

SCPTmaxDefrstTemp

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerDefrost no 3600,0 2 SNVT_time_sec

SCPTmaxDefrstTime

text("%f") SFPTrefrigDisplayCaseControllerDefrost no 20,00 2 SNVT_temp_p

SCPTmaxDischargeAirCoolingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 50,00 2 SNVT_temp_p

SCPTmaxDischargeAirHeatingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 1000 2 SNVT_press_p

SCPTmaxDuctStaticPressureSetpoint

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no 0 2

unsigned long

0 65534 65535 1 0 0 1

SCPTmaxFanIn

text("%d") SFPTdataLogger no 65535 2 SNVT_flow

SCPTmaxFlow

text("%d") text("%d", *0.26418+0(0:837)) text("%d", *2.1189+0(0:966)) SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTvariableAirVolume no 65535 2 SNVT_flow

SCPTmaxFlowHeat

SCPTmaxFlowSetpoint

text("%f", *1+0(0:1408)) text("%f", *0.588578+0(0:1405)) SFPTpumpController no 0 2 SNVT_flow

SCPTmaxFlowUnit

SCPTmaxLevelVolt

text("%f") SFPToutdoorLuminairController no 0 1

unsigned short

1 31 0 1 0 0 1

SCPTmaxNVLength

text("%d") SFPTdataLogger SFPTscheduler no 100,0 1 SNVT_lev_cont

SCPTmaxOut

text("%f") SFPTswitch no 0,0 2 SNVT_power

SCPTmaxPower

text("%f") SFPTisiSunblindActuator no 0,0 2 SNVT_press

SCPTmaxPressureSetpoint

text("%f") text("%f", *0.2953+0(0:1402)) SFPTpumpController no 1 1

unsigned short

0 255 0 1 0 0 1

SCPTmaxPrivacyZones

text("%d") no 0 17:59:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTmaxRcvT

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTopenLoopActuator no 0,0 2 SNVT_time_sec

SCPTmaxRcvTime

text("%f") SFPTaudibleFireIndicator SFPTboilerController SFPTchilledCeilingController SFPTchiller SFPTdamperActuator SFPTdischargeAirController SFPTelevatorArrivalGong SFPTelevatorDirectionLantern SFPTelevatorFireSystemsPort SFPTelevatorHallLantern SFPTelevatorPositionIndicator SFPTentryExit SFPTfanCoilUnit SFPTfireSmokeDamperActuator SFPTheatPump SFPThvacValvePositioner SFPTpumpController SFPTroofTopUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccCommandModule SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTschedulerSimple SFPTspaceComfortController SFPTsunblindController SFPTthermostat SFPTunitVentilatorController SFPTuniversalFireIndicator SFPTvariableAirVolume SFPTvariableSpeedMotorDrive SFPTvisibleFireIndicator no 0,00 2 SNVT_flow_p

SCPTmaxRemoteFlowSetpoint

text("%f", *1+0(0:1408)) text("%f", *0.588578+0(0:1405)) SFPTpumpController no 0,0 2 SNVT_press

SCPTmaxRemotePressureSetpoint

text("%f") text("%f", *0.2953+0(0:1402)) SFPTpumpController no 0,00 2 SNVT_temp_p

SCPTmaxRemoteTempSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTpumpController no 100,000 2 SNVT_lev_percent

SCPTmaxReturnExhaustFanCapacity

text("%f") SFPTdischargeAirController no 00*4 yes text("%d") SFPTclosedLoopSensor SFPTdamperActuator SFPTopenLoopSensor no 0,0 2 SNVT_time_sec

SCPTmaxSendTime

text("%f") SFPTairVelocitySensor SFPTaudibleFireIndicator SFPTautomaticTransferSwitch SFPTboilerController SFPTchannelContinuityMonitor SFPTchilledCeilingController SFPTchiller SFPTclothesWasherDomestic SFPTco2Sensor SFPTconstantLightController SFPTdamperActuator SFPTdataLogger SFPTdeviceMonitor SFPTdischargeAirController SFPTelevatorFireSystemsPort SFPTentryExit SFPTfanCoilUnit SFPTfireSmokeDamperActuator SFPTfrostSensor SFPTgeneratorSet SFPTglobalSolarRadiation SFPTheatPump SFPThvacRelativeHumiditySensor SFPThvacTempSensor SFPThvacValvePositioner SFPTidentifierSensor SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator SFPTlightSensor SFPToccupancySensor SFPToutdoorLuminairController SFPTpressureSensor SFPTpullStationFireInitiator SFPTpumpController SFPTrailcarAudioController SFPTrainSensor SFPTrefrigDisplayCaseControllerDefrost SFPTrefrigDisplayCaseControllerEvaporator SFPTrefrigDisplayCaseControllerThermostat SFPTroofTopUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccCommandModule SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTscheduler SFPTschedulerSimple SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTspaceComfortController SFPTsunblindActuator SFPTsunblindController SFPTswitch SFPTthermalFireInitiator SFPTthermostat SFPTunitVentilatorController SFPTuniversalFireInitiator SFPTvariableAirVolume SFPTvariableSpeedMotorDrive SFPTvisibleFireIndicator no 0,000 2 SNVT_lev_percent

SCPTmaxSetpoint

text("%f") SFPThvacValvePositioner SFPTvariableSpeedMotorDrive no 0 17:59:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTmaxSndT

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopSensor SFPTnodeObject SFPTopenLoopSensor no 0,0 2 SNVT_length_mil

SCPTmaxStroke

text("%f") text("%f", *0.03937+0(0:844)) SFPThvacValvePositioner no 100,000 2 SNVT_lev_percent

SCPTmaxSupplyFanCapacity

text("%f") SFPTdischargeAirController no 0,0 2 SNVT_time_sec

SCPTmeasurementInterval

text("%f") SFPTisiLampActuator no 0 2 SNVT_time_min

SCPTminDefrostTime

text("%d") no 0,00 0,00 2 SNVT_angle_deg

SCPTminDeltaAngl

text("%f") SFPTdamperActuator no 10 2 SNVT_ppm

SCPTminDeltaCO2

text("%d") SFPTco2Sensor SFPTsccCommandModule no 0 2 SNVT_flow

SCPTminDeltaFlow

text("%d") text("%d", *0.26418+0(0:837)) text("%d", *2.1189+0(0:966)) SFPTdamperActuator no 0,0 1 SNVT_lev_cont

SCPTminDeltaLevel

text("%f") SFPTconstantLightController SFPTlightSensor no 0,000 1,000 2 SNVT_lev_percent

SCPTminDeltaRH

text("%f") SFPThvacRelativeHumiditySensor SFPTsccCommandModule no 0,00 0,00 2 SNVT_temp_p

SCPTminDeltaTemp

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPTdamperActuator SFPThvacTempSensor SFPTsccCommandModule SFPTthermostat no 10,00 2 SNVT_temp_p

SCPTminDischargeAirCoolingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 30,00 2 SNVT_temp_p

SCPTminDischargeAirHeatingSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 100 2 SNVT_press_p

SCPTminDuctStaticPressureSetpoint

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no 0 2 SNVT_flow

SCPTminFlow

SCPTminFlowHeat

SCPTminFlowHeatStby

SCPTminFlowSetpoint

text("%f", *1+0(0:1408)) text("%f", *0.588578+0(0:1405)) SFPTpumpController no 0 2 SNVT_flow

SCPTminFlowStby

SCPTminFlowUnit

SCPTminFlowUnitHeat

SCPTminFlowUnitStby

SCPTminOutdoorAirFlowSetpoint

text("%d") text("%d", *2.1189+0(0:966)) SFPTdischargeAirController no 0,0 2 SNVT_press

SCPTminPressureSetpoint

text("%f") text("%f", *0.2953+0(0:1402)) SFPTpumpController no 0,00 2 SNVT_flow_p

SCPTminRemoteFlowSetpoint

text("%f", *1+0(0:1408)) text("%f", *0.588578+0(0:1405)) SFPTpumpController no 0,0 2 SNVT_press

SCPTminRemotePressureSetpoint

text("%f") text("%f", *0.2953+0(0:1402)) SFPTpumpController no 0,00 2 SNVT_temp_p

SCPTminRemoteTempSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTpumpController no 0,000 2 SNVT_lev_percent

SCPTminReturnExhaustFanCapacity

text("%f") SFPTdischargeAirController no 00*4 yes text("%d") SFPTclosedLoopSensor SFPTdamperActuator SFPTdischargeAirController SFPTopenLoopSensor SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTunitVentilatorController no 0,0 2 SNVT_time_sec

SCPTminSendTime

text("%f") SFPTairVelocitySensor SFPTboilerController SFPTcalendar SFPTchannelContinuityMonitor SFPTchilledCeilingController SFPTchiller SFPTco2Sensor SFPTconstantLightController SFPTdamperActuator SFPTdischargeAirController SFPTentryExit SFPTfanCoilUnit SFPTfrostSensor SFPTglobalSolarRadiation SFPThvacRelativeHumiditySensor SFPThvacTempSensor SFPThvacValvePositioner SFPTisiKeypad SFPTisiLampActuator SFPTisiSunblindActuator SFPTlightSensor SFPToutdoorLuminairController SFPTpressureSensor SFPTpumpController SFPTrailcarAudioController SFPTrainSensor SFPTrefrigDisplayCaseControllerDefrost SFPTsccAHU SFPTsccChilledCeiling SFPTsccCommandModule SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTsceneController SFPTscenePanel SFPTschedulerSimple SFPTspaceComfortController SFPTswitch SFPTunitVentilatorController SFPTvariableAirVolume SFPTvariableSpeedMotorDrive no 0,000 2 SNVT_lev_percent

SCPTminSetpoint

text("%f") SFPThvacValvePositioner SFPToutdoorLuminairController SFPTvariableSpeedMotorDrive no 0 17:59:59:999 0 0:0:15:0 7 SNVT_elapsed_tm

SCPTminSndT

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopSensor SFPTopenLoopSensor no 0,0 2 SNVT_length_mil

SCPTminStroke

text("%f") text("%f", *0.03937+0(0:844)) SFPThvacValvePositioner no 0,000 2 SNVT_lev_percent

SCPTminSupplyFanCapacity

text("%f") SFPTdischargeAirController no 7,00 2 SNVT_temp_p

SCPTmixedAirLowLimitSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 11,00 2 SNVT_temp_p

SCPTmixedAirTempSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no 0,0 2 SNVT_time_sec

SCPTmodeHrtBt

text("%f") SFPTrealTimeBasedScheduler no 0 0:0:1:0 0 17:59:59:999 0 0:0:5:0 7 SNVT_elapsed_tm

SCPTmonInterval

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTchannelMonitor no CE_UTF_8 13 -1 2 69 0 char_encoding_t

encoding

unsigned char

0 255 1 0 0 1

name

SCPTname1

text(("%m ", encoding),((encoding == 0) ? ("%s", name) :("%x %x %x %x %x %x %x %x %x %x %x %x", name[0], name[1], name[2], name[3], name[4], name[5], name[6], name[7], name[8], name[9], name[10], name[11]))) SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator no 00*12 12

unsigned char

0 255 1 0 0 1

name

SCPTname2

text("%c %c %c %c %c %c %c %c %c %c %c %c", name[0], name[1], name[2], name[3], name[4], name[5], name[6], name[7], name[8], name[9], name[10], name[11]) SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator no 00*12 12

unsigned char

0 255 1 0 0 1

name

SCPTname3

unsigned char

0 255 1 0 0 1

SCPTneuronId

text("%x-%x-%x-%x-%x-%x", id[0], id[1], id[2], id[3], id[4], id[5]) no 0,000 0,000 2 SNVT_lev_percent

SCPTnightPurgePosition

text("%f") SFPThvacValvePositioner no 0 2 SNVT_flow

SCPTnomAirFlow

text("%d") text("%d", *2.1189+0(0:966)) SFPTdamperActuator SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTvariableAirVolume no 0 2 SNVT_flow

SCPTnomAirFlowHeat

text("%d") text("%d", *2.1189+0(0:966)) SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 0,00 95,00 90,00 2 SNVT_angle_deg

SCPTnomAngle

text("%f") SFPTdamperActuator no 0,0 100,0 60,0 2 SNVT_freq_hz

SCPTnomFreq

text("%f") SFPTvariableSpeedMotorDrive no 1800 2 SNVT_rpm

SCPTnomRPM

text("%f") SFPTvariableSpeedMotorDrive no 0,0 2 SNVT_freq_hz

SCPTnormalRotationalSpeed

text("%f") no 0 2

unsigned long

0 65535 1 0 0 1

SCPTnsdsFbIndex

text("%d") SFPTstaticProgrammable no 1 2 1 2 SNVT_count

SCPTnumDampers

text("%d") SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 0 2 SNVT_count

SCPTnumDigits

text("%d") SFPTutilityMeter no 1 2 2 2 SNVT_count

SCPTnumValves

text("%d") SFPTfanCoilUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTunitVentilatorController no NV 65535 = FBlock 65535, Member 65535 PID 0:0:0:0:0:0:0:0, Scope 0, Index 1, NVT_CAT_INITIAL, 1 bytes, A=0, B=0, C=0 25

unsigned long

0 4095 65535 1 0 0 1

nv_index

unsigned long

0 4095 65535 1 0 0 1

fblock_index

unsigned long

1 4095 1 0 0 1

member_number

SNVT_nv_type

nv_type

SCPTnvDynamicAssignment

text("NV %d = FBlock %d, Member %d PID %x:%x:%x:%x:%x:%x:%x:%x, Scope %d, Index %d, %m, %d bytes, A=%d, B=%d, C=%d", nv_index, fblock_index, member_number, nv_type.type_program_ID[0], nv_type.type_program_ID[1], nv_type.type_program_ID[2], nv_type.type_program_ID[3], nv_type.type_program_ID[4], nv_type.type_program_ID[5], nv_type.type_program_ID[6], nv_type.type_program_ID[7], nv_type.type_scope, nv_type.type_index, nv_type.type_category, nv_type.type_length, nv_type.scaling_factor_a, nv_type.scaling_factor_b, nv_type.scaling_factor_c) no 0 0 1 no 1 0 0 1 1 0 0 1

user_flag

no 7 1 0 127 1 0 0 1

SCPTnvPriority

text("%d %d", user_flag,nv) SFPTsunblindController no PID 0:0:0:0:0:0:0:0, Scope 0, Index 1, NVT_CAT_INITIAL, 1 bytes, A=0, B=0, C=0 19 SNVT_nv_type

SCPTnvType

text("PID %x:%x:%x:%x:%x:%x:%x:%x, Scope %d, Index %d, %m, %d bytes, A=%d, B=%d, C=%d", type_program_ID[0], type_program_ID[1], type_program_ID[2], type_program_ID[3], type_program_ID[4], type_program_ID[5], type_program_ID[6], type_program_ID[7], type_scope, type_index, type_category, type_length, scaling_factor_a, scaling_factor_b, scaling_factor_c) SFPTdataLogger SFPTscheduler no in_use:0, mfg:0 1 no 1 0 0 1 1 0 0 1

in_use

no 7 1 0 1 1 0 0 1

mfg

SCPTnvUsage

text("in_use:%d, mfg:%d", in_use,mfg) SFPTstaticProgrammable no CFG_EXTERNAL 1 SNVT_config_src

SCPTnwrkCnfg

text("%m") SFPTelevatorArrivalGong SFPTelevatorDirectionLantern SFPTelevatorHallLantern SFPTelevatorPositionIndicator SFPTelevatorVoiceAnnouncer SFPTentryExit SFPTidentifierSensor SFPTnodeObject no 0 1

unsigned short

0 255 1 0 0 1

SCPTobjMajVer

text("%d") SFPTcalendar SFPTchannelContinuityMonitor SFPTchannelMonitor SFPTclothesWasherDomestic SFPTdataLogger SFPTdeviceMonitor SFPTelevatorArrivalGong SFPTelevatorDirectionLantern SFPTelevatorFireSystemsPort SFPTelevatorHallLantern SFPTelevatorPositionIndicator SFPTelevatorVoiceAnnouncer SFPTentryExit SFPThvacValvePositioner SFPTidentifierSensor SFPTisiKeypad SFPTisiLampActuator SFPTisiOccupancySensor SFPTisiSunblindActuator SFPTpumpController SFPTrailcarAudioController SFPTrailcarAudioSensor SFPTscheduler SFPTschedulerSimple SFPTstaticProgrammable SFPTsunblindActuator SFPTsunblindController SFPTutilityMeter no 0 1

unsigned short

0 255 1 0 0 1

SCPTobjMinVer

ob_nul_value

-1 3 15 0 occup_t

ob_occupied_value

-1 3 15 0 occup_t

ob_unoccupied_value

-1 3 15 0 occup_t

ob_bypass_value

-1 3 15 0 occup_t

ob_standby_value

SCPToccupancyBehavior

text("%m %m %m %m %m", ob_nul_value, ob_occupied_value, ob_unoccupied_value, ob_bypass_value, ob_standby_value) SFPTschedulerSimple no 0 0 0 3

unsigned short

0 50 255 1 0 0 1

occupied

unsigned short

0 50 255 1 0 0 1

standby_to_occupied

unsigned short

0 50 255 1 0 0 1

unoccupied_to_occupied

SCPToccupancyThresholds

text("%d %d %d", occupied, standby_to_occupied, unoccupied_to_occupied) SFPTschedulerSimple no 00*31 FF*16-00*15 00*31 31 SNVT_str_asc

SCPToemType

text("%s", ascii) SFPTaudibleFireIndicator SFPTdamperActuator SFPTfireSmokeDamperActuator SFPTpullStationFireInitiator SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTthermalFireInitiator SFPTuniversalFireIndicator SFPTuniversalFireInitiator SFPTvisibleFireIndicator no 0 17:59:59:999 0 0:0:0:0 7 SNVT_elapsed_tm

SCPToffDely

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTclosedLoopActuator SFPTfireSmokeDamperActuator SFPTopenLoopActuator no 00*4 yes text("%d") SFPTairVelocitySensor SFPTclosedLoopSensor SFPTglobalSolarRadiation SFPTopenLoopSensor SFPTpressureSensor no 0 2 SNVT_ppm

SCPToffsetCO2

text("%d") SFPTco2Sensor SFPTsccCommandModule no 0 4 SNVT_flow_f

SCPToffsetFlow

text("%f") text("%f", *2.1189+0(0:966)) text("%f", *2.1189+0(0:966)) text("%f", *0.26418+0(0:837)) SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 0,000 2 SNVT_lev_percent

SCPToffsetRH

text("%f") SFPThvacRelativeHumiditySensor SFPTsccCommandModule no 0,00 2 SNVT_temp_p

SCPToffsetTemp

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) SFPThvacTempSensor SFPTsccCommandModule no 0,0 1 SNVT_lev_cont

SCPTonOffHysteresis

text("%f") SFPTconstantLightController no 0,00 2 SNVT_angle_deg

SCPTorientation

text("%f") SFPTelevatorPositionIndicator no 40,00 2 SNVT_enthalpy

SCPToutdoorAirEnthalpySetpoint

text("%f") text("%f", *0.429923+7.67(0:1400)) text("%f", *0.429923+0(0:1400)) SFPTdischargeAirController no 10,00 2 SNVT_temp_p

SCPToutdoorAirTempSetpoint

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTdischargeAirController no OV_RETAIN 1 SNVT_override

SCPTovrBehave

text("%m") SFPTcalendar SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTisiLampActuator SFPTopenLoopActuator SFPTopenLoopSensor SFPTscheduler no 00*4 yes text("%d") SFPTcalendar SFPTclosedLoopActuator SFPTclosedLoopSensor SFPTisiLampActuator SFPTopenLoopActuator SFPTopenLoopSensor SFPTscheduler no 00*31 31 SNVT_str_asc

SCPTpartNumber

text("%s",ascii) no 0,0 4

s32_type

0 2147483646 2147483647 1 -1 0 ~~0.10000000149012~~

SCPTpollRate

text("%f") SFPTdataLogger no SET_OFF 0,0 0,00 4 SNVT_setting

SCPTpowerupState

text("%m %f %f", function, setting, rotation) SFPTconstantLightController no 100,0 1 2 SNVT_switch

SCPTprimeVal

text("%f %d", value, state) SFPToccupancyController no 0/0/0 0:0:0 - RQ_NORMAL: 88 SNVT_time_stamp

timestamp

-1 24 10 0 object_request_t

command

unsigned char

0 255 1 0 0 1

description

SCPTprogCmdHistory

text("%d/%d/%d %d:%d:%d - %m: %s", timestamp.year, timestamp.month, timestamp.day, timestamp.hour, timestamp.minute, timestamp.second, command, description) text(date(timestamp.year, timestamp.month, timestamp.day), (" "), time(timestamp.hour, timestamp.minute, timestamp.second),(" - %m: %s", command, description)) SFPTstaticProgrammable no 0/0/0 0:0:0 PSE_NO_ERROR 8 SNVT_time_stamp

time_of_error

-1 63 85 0 program_status_error_t

error

SCPTprogErrorHistory

text("%d/%d/%d %d:%d:%d %m", time_of_error.year, time_of_error.month, time_of_error.day, time_of_error.hour, time_of_error.minute, time_of_error.second, error) text(date(time_of_error.year, time_of_error.month, time_of_error.day), (" "), time(time_of_error.hour, time_of_error.minute, time_of_error.second),(" - %m", error)) SFPTstaticProgrammable no 3 - 3 2

unsigned short

3 255 1 0 0 1

first_file_index

unsigned short

3 255 1 0 0 1

last_file_index

SCPTprogFileIndexes

text("%d - %d", first_file_index, last_file_index) SFPTstaticProgrammable no 00*31 31 SNVT_str_asc

SCPTprogName

text("%s", ascii) SFPTstaticProgrammable no v0.0.0 (0/0/0 0:0:0) 11

unsigned short

0 255 1 0 0 1

major_version

unsigned short

0 255 1 0 0 1

minor_version

unsigned long

0 65535 1 0 0 1

build_number

SNVT_time_stamp

build_date

SCPTprogRevision

text("v%d.%d.%d (%d/%d/%d %d:%d:%d)", major_version, minor_version, build_number, build_date.year, build_date.month, build_date.day, build_date.hour, build_date.minute, build_date.second) text(("v%d.%d.%d (", major_version,minor_version,build_number),date(build_date.year, build_date.month, build_date.day), (" "), time(build_date.hour, build_date.minute, build_date.second), (") ")) SFPTstaticProgrammable no 0 1

unsigned short

0 255 1 0 0 1

SCPTprogSelect

text("%d") SFPTstaticProgrammable no 00*255 255

unsigned char

0 255 1 0 0 1

255

location

SCPTprogSourceLocation

text("%s", location) SFPTstaticProgrammable no 0/0/0 0:0:0 PRS_NO_PROGRAM 8 SNVT_time_stamp

time_of_state_change

-1 5 83 0 program_state_t

state

SCPTprogStateHistory

text("%d/%d/%d %d:%d:%d %m", time_of_state_change.year, time_of_state_change.month, time_of_state_change.day, time_of_state_change.hour, time_of_state_change.minute, time_of_state_change.second, state) text(date(time_of_state_change.year, time_of_state_change.month, time_of_state_change.day), (" "), time(time_of_state_change.hour, time_of_state_change.minute, time_of_state_change.second),(" - %m", state)) SFPTstaticProgrammable no 0 0 4 SNVT_muldiv

SCPTpulseValue

text("%d %d", multiplier,divisor) SFPTutilityMeter no 0 0,0 0,00 6 SNVT_rpm

speedMax

SNVT_press

pressMax

SNVT_flow_p

flowMax

SCPTpumpCharacteristic

text("%d %f %f", speedMax, pressMax, flowMax*1+0(0:1408)) text("%d %f %f", speedMax, pressMax*0.2953+0(0:1402), flowMax*0.588578+0(0:1405)) SFPTpumpController no 0,0 2 SNVT_time_sec

SCPTpumpDownDelay

text("%f") SFPTboilerController SFPTrefrigDisplayCaseControllerDefrost no 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTpwmPeriod

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) no 0,5 2 SNVT_power

SCPTpwrSendOnDelta

text("%f") no 0,0 2 SNVT_time_sec

SCPTpwrUpDelay

text("%f") SFPTchiller no 0,0 0 2 SNVT_switch

SCPTpwrUpState

text("%f %d", value, state) SFPTboilerController SFPTchiller SFPToutdoorLuminairController no 10,0 2 SNVT_time_sec

SCPTrampDownTm

text("%f") SFPTvariableSpeedMotorDrive no 10,0 2 SNVT_time_sec

SCPTrampUpTm

text("%f") SFPToutdoorLuminairController SFPTvariableSpeedMotorDrive no 0,0 0,0 4 SNVT_time_sec

earliest_time_offset

SNVT_time_sec

latest_time_offset

SCPTrandomizationInterval

text("%f %f", earliest_time_offset, latest_time_offset) SFPTschedulerSimple no 0,000 2 SNVT_lev_percent

SCPTreflection

text("%f") SFPTlightSensor no -274,0 2 SNVT_temp

SCPTrefrigGlide

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerEvaporator no 0,0,0 18

unsigned char

0 255 1 0 0 1

refrigerant

-3.4028234663853E+038 3.4028234663853E+038

SCPTrefrigType

text("%s %f,%f,%f", refrigerant, A, B, C) text("%s %f|%f|%f", refrigerant, A, B, C) SFPTrefrigDisplayCaseControllerEvaporator no 00*31 31 SNVT_str_asc

SCPTregName

text("%s", ascii) SFPTutilityDataLoggerRegister no 10 2 SNVT_press_p

SCPTreturnFanStaticPressureSetpoint

text("%f") text("%f", *0.0040217+0(0:954)) text("%f", *1.4504e-4+0(0:875)) SFPTdischargeAirController no 65535 23:0:0:0 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTrunHrAlarm

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTisiKeypad SFPTisiLampActuator SFPTlampActuator no 65535 23:0:0:0 0 0:0:0:0 7 SNVT_elapsed_tm

SCPTrunHrInit

SCPTrunTimeAlarm

text("%d %d %d %d %d", day, hour, minute, second, millisecond) SFPThvacValvePositioner no 00*4 yes text("%d") SFPTentryExit no 0 2 SNVT_time_min

SCPTsaturationDelay

SCPTscanTime

text("%d %d:%d:%d:%d", day, hour, minute, second, millisecond) text(("%d ", day), time(hour, minute, second, millisecond)) SFPTdeviceMonitor no 0 0,0 0 0 4

unsigned short

1 255 0 1 0 0 1

scene_number

unsigned short

0 200 255 5 -1 0 ~~0.5~~

setting

signed short

-90 90 -128 2 0 0 2

rotation

unsigned short

1 255 0 1 0 0 1

unoccupied_scene

SCPTscene

text("%d %f %d %d", scene_number, setting, rotation, unoccupied_scene) SFPTisiLampActuator SFPTisiSunblindActuator no EC=COLOR_CIE31_LUMEN X=0,000 Y=0,000 ABSOLUT_Y=0 5 SNVT_color_2

SCPTsceneColor

text(("EC=%m ",encoding),((encoding == 0)?("X=%f Y=%f ABSOLUT_Y=%d",color_value.CIE1931_lumen.x,color_value.CIE1931_lumen.y,color_value.CIE1931_lumen.absolute_Y):((encoding == 1) ?("X=%f Y=%f PERCENT_Y=%f",color_value.CIE1931_percent.x,color_value.CIE1931_percent.y,color_value.CIE1931_percent.percent_Y):((encoding == 2) ?("RED=%d GREEN=%d BLUE=%d",color_value.RGB.red,color_value.RGB.green,color_value.RGB.blue):((encoding == 3) ?("COL_TEMP=%d",color_value.color_temperature):("UNKNOWN")))))) no CE_UTF_8 13 -1 2 69 0 char_encoding_t

encoding

unsigned short

0 255 1 0 0 1

name

SCPTsceneName

unsigned short

1 255 0 1 0 0 1

SCPTsceneNmbr

text("%d") SFPTscenePanel no 0 1

unsigned short

0 255 1 0 0 1

SCPTsceneOffset

text("%d") SFPTpartitionWallController no 0,0 0,0 4

unsigned long

0 65535 1 -1 0 ~~0.10000000149012~~

fade_time

unsigned long

0 65535 1 -1 0 ~~0.10000000149012~~

delay_time

SCPTsceneTiming

text("%f %f", fade_time,delay_time) SFPTisiLampActuator SFPTisiSunblindActuator no 0 127 65535 3 no 1 0 0 1 1 0 0 1

temporary

no 7 1 0 127 1 0 0 1

schedule_priority

unsigned long

0 65535 65535 1 0 0 1

time_value_index

SCPTschedule

text("%d %d %d", temporary, schedule_priority, time_value_index) SFPTscheduler no -1 0 DM_EVERY_DAY -1 0 0 DM_EVERY_DAY MN_EVERY_MONTH DM_EVERY_DAY 65535 12

signed long

-1 3000 -1 1 0 0 1

year

unsigned short

0 12 1 0 0 1

month

-1 117 54 0 days_of_month_t

day

start

signed long

-1 3000 -1 1 0 0 1

year

no 1 0 0 1 1 0 0 1

temporary

no 7 1 0 12 1 0 0 1

month

-1 117 54 0 days_of_month_t

day

end

-1 24 55 0 months_t

months

-1 117 54 0 days_of_month_t

days

qualifier

unsigned long

0 65535 65535 1 0 0 1

schedule_index

SCPTscheduleDates

text("%d %d %m %d %d %d %m %m %m %d", start.year, start.month, start.day, end.year, end.temporary, end.month, end.day, qualifier.months, qualifier.days, schedule_index) SFPTcalendar no MN_NUL DM_EVERY_DAY 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 8 SNVT_sched_exc

SCPTscheduleException

text("%m %m %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d", months, days, start_time_value.sunrise_relative_flag, start_time_value.sunset_relative_flag, start_time_value.negative_time_offset_flag, start_time_value.hour, start_time_value.occ_value_ignored_flag, start_time_value.gp_value_ignored_flag, start_time_value.minutes, start_time_value.occupancy, start_time_value.gp_value, end_time.sunrise_relative_flag, end_time.sunset_relative_flag, end_time.negative_time_offset_flag, end_time.hour, end_time.start_offset_enable_flag, end_time.stop_offset_enable_flag, end_time.minutes) SFPTschedulerSimple no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleFriday

text("%d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d", time_value[0].sunrise_relative_flag, time_value[0].sunset_relative_flag, time_value[0].negative_time_offset_flag, time_value[0].hour, time_value[0].occ_value_ignored_flag, time_value[0].gp_value_ignored_flag, time_value[0].minutes, time_value[0].occupancy, time_value[0].gp_value, time_value[1].sunrise_relative_flag, time_value[1].sunset_relative_flag, time_value[1].negative_time_offset_flag, time_value[1].hour, time_value[1].occ_value_ignored_flag, time_value[1].gp_value_ignored_flag, time_value[1].minutes, time_value[1].occupancy, time_value[1].gp_value, time_value[2].sunrise_relative_flag, time_value[2].sunset_relative_flag, time_value[2].negative_time_offset_flag, time_value[2].hour, time_value[2].occ_value_ignored_flag, time_value[2].gp_value_ignored_flag, time_value[2].minutes, time_value[2].occupancy, time_value[2].gp_value, time_value[3].sunrise_relative_flag, time_value[3].sunset_relative_flag, time_value[3].negative_time_offset_flag, time_value[3].hour, time_value[3].occ_value_ignored_flag, time_value[3].gp_value_ignored_flag, time_value[3].minutes, time_value[3].occupancy, time_value[3].gp_value, time_value[4].sunrise_relative_flag, time_value[4].sunset_relative_flag, time_value[4].negative_time_offset_flag, time_value[4].hour, time_value[4].occ_value_ignored_flag, time_value[4].gp_value_ignored_flag, time_value[4].minutes, time_value[4].occupancy, time_value[4].gp_value, time_value[5].sunrise_relative_flag, time_value[5].sunset_relative_flag, time_value[5].negative_time_offset_flag, time_value[5].hour, time_value[5].occ_value_ignored_flag, time_value[5].gp_value_ignored_flag, time_value[5].minutes, time_value[5].occupancy, time_value[5].gp_value, time_value[6].sunrise_relative_flag, time_value[6].sunset_relative_flag, time_value[6].negative_time_offset_flag, time_value[6].hour, time_value[6].occ_value_ignored_flag, time_value[6].gp_value_ignored_flag, time_value[6].minutes, time_value[6].occupancy, time_value[6].gp_value) SFPTschedulerSimple no MN_EVERY_MONTH DM_EVERY_DAY 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 8 SNVT_sched_exc

SCPTscheduleHoliday

SCPTscheduleInternal

text("%m") no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleMonday

unsigned char

0 126 1 0 0 1

name

SCPTscheduleName

text("%s", name) SFPTcalendar SFPTscheduler no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleSaturday

text("%d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d", time_value[0].sunrise_relative_flag, time_value[0].sunset_relative_flag, time_value[0].negative_time_offset_flag, time_value[0].hour, time_value[0].occ_value_ignored_flag, time_value[0].gp_value_ignored_flag, time_value[0].minutes, time_value[0].occupancy, time_value[0].gp_value, time_value[1].sunrise_relative_flag, time_value[1].sunset_relative_flag, time_value[1].negative_time_offset_flag, time_value[1].hour, time_value[1].occ_value_ignored_flag, time_value[1].gp_value_ignored_flag, time_value[1].minutes, time_value[1].occupancy, time_value[1].gp_value, time_value[2].sunrise_relative_flag, time_value[2].sunset_relative_flag, time_value[2].negative_time_offset_flag, time_value[2].hour, time_value[2].occ_value_ignored_flag, time_value[2].gp_value_ignored_flag, time_value[2].minutes, time_value[2].occupancy, time_value[2].gp_value, time_value[3].sunrise_relative_flag, time_value[3].sunset_relative_flag, time_value[3].negative_time_offset_flag, time_value[3].hour, time_value[3].occ_value_ignored_flag, time_value[3].gp_value_ignored_flag, time_value[3].minutes, time_value[3].occupancy, time_value[3].gp_value, time_value[4].sunrise_relative_flag, time_value[4].sunset_relative_flag, time_value[4].negative_time_offset_flag, time_value[4].hour, time_value[4].occ_value_ignored_flag, time_value[4].gp_value_ignored_flag, time_value[4].minutes, time_value[4].occupancy, time_value[4].gp_value, time_value[5].sunrise_relative_flag, time_value[5].sunset_relative_flag, time_value[5].negative_time_offset_flag, time_value[5].hour, time_value[5].occ_value_ignored_flag, time_value[5].gp_value_ignored_flag, time_value[5].minutes, time_value[5].occupancy, time_value[5].gp_value, time_value[6].sunrise_relative_flag, time_value[6].sunset_relative_flag, time_value[6].negative_time_offset_flag, time_value[6].hour, time_value[6].occ_value_ignored_flag, time_value[6].gp_value_ignored_flag, time_value[6].minutes, time_value[6].occupancy, time_value[6].gp_value) SFPTschedulerSimple no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleSunday

text("%d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d", time_value[0].sunrise_relative_flag, time_value[0].sunset_relative_flag, time_value[0].negative_time_offset_flag, time_value[0].hour, time_value[0].occ_value_ignored_flag, time_value[0].gp_value_ignored_flag, time_value[0].minutes, time_value[0].occupancy, time_value[0].gp_value, time_value[1].sunrise_relative_flag, time_value[1].sunset_relative_flag, time_value[1].negative_time_offset_flag, time_value[1].hour, time_value[1].occ_value_ignored_flag, time_value[1].gp_value_ignored_flag, time_value[1].minutes, time_value[1].occupancy, time_value[1].gp_value, time_value[2].sunrise_relative_flag, time_value[2].sunset_relative_flag, time_value[2].negative_time_offset_flag, time_value[2].hour, time_value[2].occ_value_ignored_flag, time_value[2].gp_value_ignored_flag, time_value[2].minutes, time_value[2].occupancy, time_value[2].gp_value, time_value[3].sunrise_relative_flag, time_value[3].sunset_relative_flag, time_value[3].negative_time_offset_flag, time_value[3].hour, time_value[3].occ_value_ignored_flag, time_value[3].gp_value_ignored_flag, time_value[3].minutes, time_value[3].occupancy, time_value[3].gp_value, time_value[4].sunrise_relative_flag, time_value[4].sunset_relative_flag, time_value[4].negative_time_offset_flag, time_value[4].hour, time_value[4].occ_value_ignored_flag, time_value[4].gp_value_ignored_flag, time_value[4].minutes, time_value[4].occupancy, time_value[4].gp_value, time_value[5].sunrise_relative_flag, time_value[5].sunset_relative_flag, time_value[5].negative_time_offset_flag, time_value[5].hour, time_value[5].occ_value_ignored_flag, time_value[5].gp_value_ignored_flag, time_value[5].minutes, time_value[5].occupancy, time_value[5].gp_value, time_value[6].sunrise_relative_flag, time_value[6].sunset_relative_flag, time_value[6].negative_time_offset_flag, time_value[6].hour, time_value[6].occ_value_ignored_flag, time_value[6].gp_value_ignored_flag, time_value[6].minutes, time_value[6].occupancy, time_value[6].gp_value) SFPTschedulerSimple no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleThursday

invalid

no 1 1 0 1 1 0 0 1

terminator

no 6 2 0 47 1 0 0 1

hour

unsigned short

0 59 1 0 0 1

minute

SNVT_sched_val

value

SCPTscheduleTimeValue

text("%d %d %d %d %d", invalid, terminator, hour, minute, value) SFPTscheduler no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleTuesday

text("%d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d %d %d %d %d %d %d %d %m %d", time_value[0].sunrise_relative_flag, time_value[0].sunset_relative_flag, time_value[0].negative_time_offset_flag, time_value[0].hour, time_value[0].occ_value_ignored_flag, time_value[0].gp_value_ignored_flag, time_value[0].minutes, time_value[0].occupancy, time_value[0].gp_value, time_value[1].sunrise_relative_flag, time_value[1].sunset_relative_flag, time_value[1].negative_time_offset_flag, time_value[1].hour, time_value[1].occ_value_ignored_flag, time_value[1].gp_value_ignored_flag, time_value[1].minutes, time_value[1].occupancy, time_value[1].gp_value, time_value[2].sunrise_relative_flag, time_value[2].sunset_relative_flag, time_value[2].negative_time_offset_flag, time_value[2].hour, time_value[2].occ_value_ignored_flag, time_value[2].gp_value_ignored_flag, time_value[2].minutes, time_value[2].occupancy, time_value[2].gp_value, time_value[3].sunrise_relative_flag, time_value[3].sunset_relative_flag, time_value[3].negative_time_offset_flag, time_value[3].hour, time_value[3].occ_value_ignored_flag, time_value[3].gp_value_ignored_flag, time_value[3].minutes, time_value[3].occupancy, time_value[3].gp_value, time_value[4].sunrise_relative_flag, time_value[4].sunset_relative_flag, time_value[4].negative_time_offset_flag, time_value[4].hour, time_value[4].occ_value_ignored_flag, time_value[4].gp_value_ignored_flag, time_value[4].minutes, time_value[4].occupancy, time_value[4].gp_value, time_value[5].sunrise_relative_flag, time_value[5].sunset_relative_flag, time_value[5].negative_time_offset_flag, time_value[5].hour, time_value[5].occ_value_ignored_flag, time_value[5].gp_value_ignored_flag, time_value[5].minutes, time_value[5].occupancy, time_value[5].gp_value, time_value[6].sunrise_relative_flag, time_value[6].sunset_relative_flag, time_value[6].negative_time_offset_flag, time_value[6].hour, time_value[6].occ_value_ignored_flag, time_value[6].gp_value_ignored_flag, time_value[6].minutes, time_value[6].occupancy, time_value[6].gp_value) SFPTschedulerSimple no 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 0 0 0 0 0 0 0 OC_OCCUPIED 0 28 SNVT_time_val_2

time_value

SCPTscheduleWednesday

reserved

no 1 5 0 1 1 0 0 1

alternate_time_source

no 1 6 0 1 1 0 0 1

general_purpose_output

no 1 7 0 1 1 0 0 1

sunrise_sunset_relative

SCPTschedulerOptions

text("%d %d %d %d", reserved, alternate_time_source, general_purpose_output, sunrise_sunset_relative) SFPTschedulerSimple no 0,0 0 2 SNVT_switch

SCPTscrollSpeed

text("%f %d", value, state) SFPTelevatorDirectionLantern SFPTelevatorHallLantern SFPTelevatorPositionIndicator no 0,0 0 2 SNVT_switch

SCPTsecondVal

text("%f %d", value, state) SFPToccupancyController no 1,0000 2 SNVT_multiplier

SCPTsensConstTmp

text("%f") SFPTdamperActuator no 1,0000 2 SNVT_multiplier

SCPTsensConstVAV

text("%f") SFPTdamperActuator SFPTdischargeAirController SFPTsccAHU SFPTsccChilledCeiling SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController no 00*31 31 SNVT_str_asc

SCPTserialNumber

text("%s", ascii) no -10,00,-10,00,-10,00,-10,00,-10,00,-10,00 35,00,35,00,35,00,35,00,35,00,35,00 23,00,25,00,28,00,21,00,19,00,16,00 12 SNVT_temp_setpt

SCPTsetPnts

text("%f,%f,%f,%f,%f,%f", occupied_cool, standby_cool, unoccupied_cool, occupied_heat, standby_heat, unoccupied_heat) text("%f|%f|%f|%f|%f|%f", occupied_cool, standby_cool, unoccupied_cool, occupied_heat, standby_heat, unoccupied_heat) text("%f,%f,%f,%f,%f,%f", occupied_cool*1.8+32(0:855), standby_cool*1.8+32(0:855), unoccupied_cool*1.8+32(0:855), occupied_heat*1.8+32(0:855), standby_heat*1.8+32(0:855), unoccupied_heat*1.8+32(0:855)) text("%f|%f|%f|%f|%f|%f", occupied_cool*1.8+32(0:855), standby_cool*1.8+32(0:855), unoccupied_cool*1.8+32(0:855), occupied_heat*1.8+32(0:855), standby_heat*1.8+32(0:855), unoccupied_heat*1.8+32(0:855)) SFPTchilledCeilingController SFPTdischargeAirController SFPTfanCoilUnit SFPTheatPump SFPTroofTopUnit SFPTsccAHU SFPTsccChilledCeiling SFPTsccCommandModule SFPTsccFanCoil SFPTsccHeatPump SFPTsccRadiator SFPTsccRooftop SFPTsccSelfContained SFPTsccUnitVentilator SFPTsccVAV SFPTspaceComfortController SFPTthermostat SFPTunitVentilatorController SFPTvariableAirVolume no 00*4 yes text("%d") no MSC_UNKNOWN 1 -1 2 52 0 master_slave_t

SCPTsluiceCnfg

text("%m") SFPTentryExit no 0,000 2 SNVT_smo_obscur

SCPTsmokeDayAlrmLim

text("%f") SFPTsmokeFireInitiatorIntelli no 0,000 2 SNVT_smo_obscur

SCPTsmokeDayPreAlrmLim

text("%f") SFPTsmokeFireInitiatorIntelli no 0,000 2 SNVT_smo_obscur

SCPTsmokeNightAlrmLim

text("%f") SFPTsmokeFireInitiatorIntelli no 0,000 2 SNVT_smo_obscur

SCPTsmokeNightPreAlrmLim

text("%f") SFPTsmokeFireInitiatorIntelli no 0,000 2 SNVT_smo_obscur

SCPTsmokeNomSens

text("%f") SFPTsmokeFireInitiatorIntelli no 00*4 yes text("%d") SFPTairVelocitySensor SFPTclosedLoopSensor SFPTglobalSolarRadiation SFPTisiLampActuator SFPTopenLoopSensor SFPTpressureSensor SFPTutilityDataLoggerRegister SFPTutilityMeter no 0 0 2

unsigned short

1 255 0 1 0 0 1

subnet

no 1 0 0 0 1 0 0 1

reserved

no 7 1 0 127 1 0 0 1

node

SCPTsourceAddress

text("%d %d", subnet, node) SFPTdataLogger no 30,000 2 SNVT_lev_percent

SCPTspaceHumSetpoint

text("%f") SFPTdischargeAirController no 0,0 2 SNVT_freq_hz

SCPTstandbyRotationalSpeed

text("%f") no 0,0 1 SNVT_lev_cont

SCPTstep

text("%f") SFPTconstantLightController no 2,5 1 SNVT_lev_cont

SCPTstepValue

text("%f") SFPTscenePanel SFPTswitch no 0,0 2 SNVT_time_sec

SCPTstrtupDelay

text("%f") SFPTrefrigDisplayCaseControllerDefrost SFPTrefrigDisplayCaseControllerEvaporator no 0,000 2 SNVT_lev_percent

SCPTstrtupOpen

text("%f") SFPTrefrigDisplayCaseControllerEvaporator no 0-0-0T0:0:0 0-12-31T23:0:0 0-1-1T0:0:0 7 SNVT_time_stamp

SCPTsummerTime

text("%d/%d/%d %d:%d:%d", year, month, day, hour, minute, second) text(date(year, month, day), (" "), time(hour, minute, second)) text("%d-%d-%dT%d:%d:%d", year, month, day, hour, minute, second) SFPTrealTimeKeeper no 0 0 0 0 0 0 7 SNVT_time_stamp

SCPTsunriseTime

text("%d %d %d %d %d %d", year, month, day, hour, minute, second) SFPTschedulerSimple no 0 0 0 0 0 0 7 SNVT_time_stamp

SCPTsunsetTime

text("%d %d %d %d %d %d", year, month, day, hour, minute, second) SFPTschedulerSimple no 0,00 2 SNVT_temp_p

SCPTsuperHtRefInit

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerEvaporator no 0,00 2 SNVT_temp_p

SCPTsuperHtRefMax

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerEvaporator no 0,00 2 SNVT_temp_p

SCPTsuperHtRefMin

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTrefrigDisplayCaseControllerEvaporator no 0,00 2 SNVT_temp_diff_p

SCPTtempOffset

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) no 0,00 2 SNVT_temp_diff_p

SCPTtemperatureHysteresis

text("%f", *1+0(0:854)) text("%f", *1.8+0(0:855)) no DFT_TERM_TEMP 1 SNVT_defr_term

SCPTtermTimeTemp

text("%m") SFPTrefrigDisplayCaseControllerDefrost no 0,0 2 SNVT_temp_ror

SCPTthermAlrmROR

text("%f", *1+0(0:1012)) text("%f", *1.8+0(0:1011)) SFPTthermalFireInitiator no THERM_NO_CONTROL 1 SNVT_therm_mode

SCPTthermMode

text("%m") SFPTrefrigDisplayCaseControllerThermostat no -274,0 2 SNVT_temp

SCPTthermThreshold

text("%f", *1+0(0:854)) text("%f", *1.8+32(0:855)) SFPTthermalFireInitiator no EMT_END_OF_LIST,0:0,0 4 -1 4 51 0 event_mode_type_t

record_type

unsigned short

0 23 1 0 0 1

hour

unsigned short

0 59 1 0 0 1

minute

unsigned short

0 255 1 0 0 1

event_mode

SCPTtimeEvent

text("%m,%d:%d,%d", record_type, hour, minute, event_mode) text(("%m|", record_type), time(hour, minute), ("|%d", event_mode)) SFPTrealTimeBasedScheduler no IOM_MINUTE 0 2 -1 4 58 0 interval_of_month_t

units

unsigned short

1 255 1 0 0 1

minutes_interval

unsigned short

1 31 1 0 0 1

date_of_month

unsigned short

0 23 1 0 0 1

hour_of_day

-1 6 1 0 days_of_week_t

day_of_week

unsigned short

1 255 1 0 0 1

hours_interval

value

SCPTtimePeriod

text(("%m ", units),((units == 0) ? ("%d ", value.minutes_interval) :((units == 1) ? ("%d ", value.hours_interval) :((units == 2) ? ("%d ", value.hour_of_day) :((units == 3) ? ("%d ", value.day_of_week) :((units == 4) ? ("%d ", value.date_of_month) : ("UNKNOWN"))))))) SFPTutilityMeter no TMS_SCHEDULER_NV 1 -1 4 86 0 time_source_t

SCPTtimeSource

text("%m") no 0 CAL_MEU 2:0:0 4 1 DAY_SUN 2:0:0 10 5 DAY_SUN 15 SNVT_time_zone

SCPTtimeZone

text( ("%d %m %d:%d:%d ",second_time_offset, type_of_description,hour_of_start_DST, minute_of_start_DST,second_of_start_DST),((type_of_description == 0) ?("%d %d:%d:%d %d" ,start_DST.G_day_of_start_DST,hour_of_end_DST,minute_of_end_DST,second_of_end_DST,end_DST.G_day_of_end_DST):((type_of_description == 1) ?("%d %d:%d:%d %d" ,start_DST.J_day_of_start_DST,hour_of_end_DST,minute_of_end_DST,second_of_end_DST,end_DST.J_day_of_end_DST):((type_of_description == 2) ?("%d %d %m %d:%d:%d %d %d %m",start_DST.M_start_DST.month_of_start_DST,start_DST.M_start_DST.week_of_start_DST,start_DST.M_start_DST.dateday_of_start_DST,hour_of_end_DST,minute_of_end_DST,second_of_end_DST,end_DST.M_end_DST.month_of_end_DST,end_DST.M_end_DST.week_of_end_DST,end_DST.M_end_DST.dateday_of_end_DST):("UNKNOWN"))))) text(("%d %m ", second_time_offset, type_of_description), time(hour_of_start_DST, minute_of_start_DST, second_of_start_DST), ((type_of_description == 0) ?((" %d " ,start_DST.G_day_of_start_DST), time(hour_of_end_DST, minute_of_end_DST, second_of_end_DST), (" %d", end_DST.G_day_of_end_DST)) :((type_of_description == 1) ?((" %d ", start_DST.J_day_of_start_DST), time(hour_of_end_DST, minute_of_end_DST, second_of_end_DST), (" %d", end_DST.J_day_of_end_DST)) :((type_of_description == 2) ?((" %d %d %m ", start_DST.M_start_DST.month_of_start_DST, start_DST.M_start_DST.week_of_start_DST, start_DST.M_start_DST.dateday_of_start_DST), time(hour_of_end_DST,minute_of_end_DST,second_of_end_DST), (" %d %d %m",end_DST.M_end_DST.month_of_end_DST, end_DST.M_end_DST.week_of_end_DST, end_DST.M_end_DST.dateday_of_end_DST)) :("UNKNOWN"))))) no 0,0 2 SNVT_time_sec

SCPTtimeout

text("%f") no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 SNVT_trans_table

SCPTtrnsTblX

text("%f %f %f %f %f %f %f %d %d %d %d %d %d %d", point[0], point[1], point[2], point[3], point[4], point[5], point[6], interp_pts_0_to_1, interp_pts_1_to_2, interp_pts_2_to_3, interp_pts_3_to_4, interp_pts_4_to_5, interp_pts_5_to_6, interp_pts_6_to_0) SFPTclosedLoopActuator SFPTclosedLoopSensor SFPThvacValvePositioner SFPTopenLoopActuator SFPTopenLoopSensor no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 SNVT_trans_table

SCPTtrnsTblX2

text("%f %f %f %f %f %f %f %d %d %d %d %d %d %d", point[0], point[1], point[2], point[3], point[4], point[5], point[6], interp_pts_0_to_1, interp_pts_1_to_2, interp_pts_2_to_3, interp_pts_3_to_4, interp_pts_4_to_5, interp_pts_5_to_6, interp_pts_6_to_0) SFPThvacValvePositioner no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 SNVT_trans_table

SCPTtrnsTblX3

text("%f %f %f %f %f %f %f %d %d %d %d %d %d %d", point[0], point[1], point[2], point[3], point[4], point[5], point[6], interp_pts_0_to_1, interp_pts_1_to_2, interp_pts_2_to_3, interp_pts_3_to_4, interp_pts_4_to_5, interp_pts_5_to_6, interp_pts_6_to_0) SFPThvacValvePositioner no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 SNVT_trans_table

SCPTtrnsTblY

SCPTtrnsTblY2

text("%f %f %f %f %f %f %f %d %d %d %d %d %d %d", point[0], point[1], point[2], point[3], point[4], point[5], point[6], interp_pts_0_to_1, interp_pts_1_to_2, interp_pts_2_to_3, interp_pts_3_to_4, interp_pts_4_to_5, interp_pts_5_to_6, interp_pts_6_to_0) SFPThvacValvePositioner no 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 SNVT_trans_table

SCPTtrnsTblY3

SCPTupdateRate

text("%f") SFPTrealTimeKeeper no 00*4 yes text("%d") SFPTscheduler no 00*22 22

unsigned char

32 126 1 0 0 1

name

SCPTvalueName

text("%c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c", name[0], name[1], name[2], name[3], name[4], name[5], name[6], name[7], name[8], name[9], name[10], name[11], name[12], name[13], name[14], name[15], name[16], name[17], name[18], name[19], name[20], name[21]) SFPTscheduler no DCM_QUICK_OPEN DCM_FREE_DEFINED DCM_QUICK_OPEN 1 SNVT_dev_c_mode

SCPTvalveFlowCharacteristic

text("%m") SFPThvacValvePositioner no 0 2 SNVT_flow_p

SCPTvalveKvs

text("%d") SFPThvacValvePositioner no 0 2 SNVT_length_mil

SCPTvalveNominalSize

text("%d") SFPThvacValvePositioner no VALVE_NORMAL 1 SNVT_valve_mode

SCPTvalveOperatingMode

text("%m") SFPThvacValvePositioner no 0 2 SNVT_length_mil

SCPTvalveStroke

text("%d") SFPThvacValvePositioner no DCM_INVFNC_QCK_OPN DCM_INVFNC_QUAD 0 1 SNVT_dev_c_mode

SCPTvalveType

text("%m") SFPThvacValvePositioner no 0,0 2

unsigned long

0 10000 65535 1 -1 0 ~~0.10000000149012~~

SCPTvisOutput

text("%f") SFPTvisibleFireIndicator no 65535 65535 65535 65535 65535 65535 65535 14

unsigned long

0 65535 65535 1 0 0 1

schedule_index

SCPTweeklySchedule

text("%d %d %d %d %d %d %d", schedule_index[0], schedule_index[1], schedule_index[2], schedule_index[3], schedule_index[4], schedule_index[5], schedule_index[6]) SFPTscheduler no 0-0-0T0:0:0 0-12-31T23:0:0 0-1-1T0:0:0 7 SNVT_time_stamp

SCPTwinterTime

unsigned long

0 65535 65535 1 0 0 1

SCPTzoneNum

text("%d") SFPTaudibleFireIndicator SFPTelevatorFireSystemsPort SFPTfireSmokeDamperActuator SFPTpullStationFireInitiator SFPTsmokeFireInitiatorConvent SFPTsmokeFireInitiatorIntelli SFPTthermalFireInitiator SFPTuniversalFireIndicator SFPTuniversalFireInitiator SFPTvisibleFireIndicator This file is the standard type file, containing Standard Network Variable Types (SNVTs), Standard Configuration Property Types (SCPTs), and the enumeration types that support them. This file was created and is maintained by LonMark International. Contact us at +1-408-938-5266, at http://www.lonmark.org, or at 550 Meridian Ave, San Jose CA 95126, USA. OLC Limits Setpoints MIN/MAX values for the status report are set here Limit high current Limit low current Limit main current high Limit main current low Limit lamp voltage high Limit lamp voltage low Limit main voltage high Limit main voltage low Limit power factor low Limit power high Limit power low Actual position feedback delay The period for updating the feedback output when the actuator position does not match the requested position Actuator Characteristic This configuration property can be used to provide the characteristic of the actuator Actuator label The identification of the exact actuator type or label AHAM Appliance Model Appliance Model code as defined by the Association of Home Appliance Manufacturers Air temperature 1 percent alarm The weighting of the air temp 1 sensor when calculating the air temp alarm Air temperature 1 percent day The air temperature weighting used during day control Air temperature 1 percent night The air temperature weighting used during night control Alarm clear time 1 The time period that an alarm 1 condition must not exist before it is regarded as a valid cleared alarm Alarm clear time 2 The time period that an alarm 2 condition must not exist before it is regarded as a valid cleared alarm Alarm output inhibit time The time period for which alarms are inhibited after an object is enabled or the node is reset Alarm set time 1 The time period that an alarm 1 condition must exist before it is regarded as a valid alarm Alarm set time 2 The time period that an alarm 2 condition must exist before it is regarded as a valid alarm Heating duct area Nominal cross-sectional airflow area of the hot or ventilation deck of a dual duct VAV terminal unit Audible sound output intensity Audible sound output intensity specification of the device at 1 meter distant Audible level The audible level output of the device Auto answer Enable the automatic call answer function of a device boolean Base value The base value (where to begin counting) Backup Schedule Hour ON Time when the luminare will be switched ON in case of communication failure Hours Minute ON Time when the luminare will be switched ON in case of communication failure Minutes Hour OFF Time when the luminare will be switched OFF in case of communication failure Minute OFF Time when the luminare will be switched OFF in case of communication failure Minute Minimum time for movement The minimum time in hours for movement to prevent blocking Brightness output The brightness output of a display device Building static pressure Setpoint for the default static pressure for the building Button color. Button color configuration for on and off states of a button. May be used to create an array that is used with a SCPTbuttonAction array to specify keypad button behavior. On color. RGB color for the on state. Red. Red level component of the on state color Green. Green level component of the on state color Blue. Blue level component of the on state color Off color. RGB color for the off state Red level component of the off state color Green level component of the off state color Blue level component of the off state color Button held action. Button action definition used to create a button held action array, with an entry per button. Button action. Button action for the associated button Value. Value for button actions that require a numeric value. Scene number. Specified scene number for the toggle and set scene actions. Group number Specified group number for the toggle, enable, and disable group actions. Setting. Setting level. Specifies an absoloute level for the Set Level action. Specifies a relative level for the Increase, Decrease, Move Open, Move Closed, Rotate Open, and Rotate Closed actions. degrees Button pressed action. Button action definition used to create a button pressed action array, with an entry per button. This SCPT defines the minimum entries required by the ISI profiles. Button repeat interval Time between updates when a button is held down. The updates themselves may be throttled by the application or a SCPTminSendTime CP. Used to create an array used with a SCPTbuttonAction CP array. milliseconds Bypass time The maximum amount of time that the controller can be in the bypass (occupancy) mode following the last bypass request. Zero disables the timer. Controller off delay The delay after which the controller output is switched off Controller on delay The delay after which the controller output is switched on Clock Calibration Corrects clock-cycle variations milliseconds per hour Combination-Flow Characteristic This configuration property can be used to provide the desired system control flow characteristic Control priority Priority of a control input or output, lower values mean higher priority priority value Control signal Start and end points (X,Y) for a transition X1, Y1, X2, Y2 X1 Y1 X2 Y2 Temperature weighting Weighting between two temperatures in percent Cooling setpoint lower limit Limits the lower extent of the permitted range for the cooling setpoint Cooling setpoint The default setpoint for the leaving chilled water temperature in cooling mode when the default behavior selector is set to zero Cooling setpoint upper limit Limits the upper extent of the permitted range for the cooling setpoint Cooling lockout Setpoint for the outdoor air temperature at which cooling will be disabled Cooling reset enable The cooling reset control is enabled Current sense enable Enables current sensing for manual load control Cut-out value The cut-out limit Day date index One or two dates for matching with a start index to the time-event array First day and month, second day and month, time-event index First day Day of month days First month Month of year months Second day Day of month, zero for no date entry Second month Month of year, zero for no date entry Event index Time-event array index index Day/night control Configures the day/night function Debounce time The debouncing time to generate the detection envelope Default speed scale Default value for the speed scale Definition week mask Day type definition for every day of the week Start index array array of 7 index values Default auto-pan speed The default auto-pan speed for a device % of full level Default camera PTZ The default camera pan, tilt, and zoom speeds default Setting Default Security State Provides the default security state upon power cycle or non-detection Default behavior Selects which set of values will be used on power-up and communication failure, between the stated default values (0), or manufacturer-specified values (1) Defrost cycles Number of equally-spaced defrost cycles to perform per day units Defrost detect temperature differential Temperature differential of coil refrigerant temperature above discharge air temperature that indicates defrost Fan delay after defrost Delay after refrigeration is resumed after defrost before fan is started Defrost hold on sync Enable hold in defrost mode until synchronization signal goes away Defrost internal schedule Enable the internal scheduling of defrost Defrost mode The type of defrost to perform Defrost recovery time Time allowed after defrost finishes for temperature to be within normal limits Defrost start time Start time for the first daily defrost Delay time, default to scene The delay time, default to scene Delta night The value to be added to the cut-out value to get the cut-out limit during night control Device list entry description. Human readable description for an entry in the device list Device list entry. Device list entry containing the address of the device to be monitored Device address as subnet/node address. This structure is filled out in case the device address is given as subnet/node address Destination subnet. Specifies the destination subnet number (1-255) Unused. Set to 0 Destination node. Specifies the destination node number (1-127) Device address as unique node ID address. This structure is filled out in case the device address is given as unique node ID address Destination subnet. Specifies the destination subnet number (1-255) or 0 if the destination subnet is unknown Device major version number The major version number for the device Device minor version number The minor version number for the device Device control mode Normal default operating device control mode Group ID A logical group control ID for the device ID number Device Output Selection This selectes the Output which will be used on an OLC Dial string Telephone number string used in dialing, including characters used for control Difference night The value to be added to the cut-out value to get the cut-in limit during night control Differential temperature Setpoint for differential temperature for economizer enable Difference value The value to be added to the cut-out value to get the cut-in limit Direction / Safety position The actuator sense of rotation and safety position; bit 0 set => counterclockwise, bit 1 set => damper open Discharge air cooling setpoint Default cooling setpoint for discharge air Discharge air dewpoint Setpoint for the default discharge air dewpoint Discharge air heating setpoint Default heating setpoint for discharge air Drain delay The delay to use after the defrost has terminated Drive time Time to be taken by the actuator to move from one extreme to the other The transition time for a full 100% stroke (change from one extreme to the other) Duct area or size The duct area used to calculate the air flow, relevant only for VAV actuators / controllers Duct static pressure limit The duct static pressure limit for equipment protection Duct static pressure Setpoint for default duct static pressure Effective period Time period during which a functional block is effective. Starting date Starting date of the effective period Year Starting year Month Starting month Day Starting day Ending date Ending date of the effective period Ending year Ending year of the effective period Ending month Ending month of the effective period Ending day Ending day of the effective period Emergency position Position in percent of full scale (open) for emergency operation Enable Status Message Lamp current high Lamp current low Main current high Main current low Lamp voltage high (DALI Bit5) Lamp voltage low (DALI Bit5) Main voltage high Main voltage low Power factor low Temperature high (DALI Bit 4) Power high Power low Relay failure Capacity failure (DALI Bit 7) Lamp failure (DALI Bit 6) Ballast failure Internal communiction failure External communication failure Main voltage below performance specification (DALI Bit 1) Lamp restart retry counter / cycling failure (DALI Bit 2) Fading ready (DALI Bit 3) Ballast temperature too high digital input A active digital input B active Reserve Energy counter initialization The initial value of the energy counter for the associated network variable Exhaust enable position Setpoint for the exhaust-enable outdoor air damper position Fade time, default to scene The desired time to fade to zero Fan differential Setpoint for the percent capacity differential between the supply and return fans Fan-in enable. Enables fan-in of multiple data sources. When True, the application examines the source address of each input value and uses it to determine the data source of the update. Fan operation Field calibration Used by the light sensor to self calibrate the hardware Fire indicator device type Describes the fire indicator device Fire initiator type identifier The fire initiator type identifier, entered into the device at installation and/or configuration time Fire text information Text information relevant to fire conditions. A '>' at end of string indicates presence of fire text 2. Fire text information, continuation Continuation text information relevant to fire conditions. A '>' at end of string indicates presence of fire text 3. Fire text information, second continuation Second continuation text information relevant to fire conditions Flash rate specification Flash rate specification for visible indication (strobe) device Free cooling valve position Valve position in percent open for free cooling HVAC mode Gain This parameter is used to calibrate the external hardware. VAV gain The gain of the VAV controller object VAV sensor constant Calibration constant used to calculate airflow Geographic Location Heating setpoint lower limit Limits the lower extent of the permitted range for the heating setpoint Heating setpoint The default setpoint for the leaving water temperature in heating mode when the default behavior selector is set to zero Heating setpoint upper limit Limits the upper extent of the permitted range for the heating setpoint Heating lockout Setpoint for the outdoor air temperature at which heating will be disabled Heating reset enable The heating reset control is enabled High limit defrost delay The time limit before high air temp alarm during pull-down High limit delay The time limit during normal operation before the alarm air temp high alarm is recognized High limit temperature The high alarm set point for the alarm air temp network variable High limit 1 Enable Controls whether high limit 1 is in effect High limit 2 Enable Controls whether high limit 2 is in effect Hold time Hold time for occupied state after there is no occupancy detected Humidity high limit setpoint High limit humidity setpoint for the controlled space. A zero value disables HVAC mode The default operating mode of the device when the default behavior selector is set to zero HVAC unit type The type of HVAC equipment being controlled Sensor Identity A number from 0 to 65535 identifying a sensor by number Interface description. Human readable description of the interface the functional block is assigned to Input value feedback delay The time period after the last update in a succession of changes to the input, before the feedback output is updated Injection delay Installation date The date of installation for the device Installed level The floor or level on which the device is installed floor number Invert output This parameter indicates to invert the active polarity, if the value is nonzero (ON). Lamp Power Lighting group enable Bit masks to enable or disable up to 64 ISI lighting groups. Group 0 is not used. Groups may also be enabled or disabled using a SNVT_switch_2 update. Lighting group membership Bit masks to specify membership in up to 64 ISI lighting groups. Group 0 is not used. CO2 limit CO2 threshold limit, controller to maintain concentration below this limit Chiller capacity limit The default value for the capacity limit of the chiller when the default behavior selector is set to zero Link Power Detection Enabled. Determines, whether link power detection is enabled. If yes, nvoLinkPower indicates existence of link power voltage. Load control offsets Offsets to be used during standby (unoccupied state but home, or sleep mode) and demand-response modes percent Location Provides descriptive physical location information related to the object. Data log alarm threshold. Specifies the log level required to trigger an alarm condition for the data logger. percent Data log capacity Specifies the total capacity of all data logs on a device. The size of each data log is specified by its cpLogSize value. The value is specified in bytes. bytes Data log header. Describes contents of a data log. Data log file type. Constant identifying a data log. Data log file format major version number. Data log minor version number. Data log number. Index of the data log functional block that received this update. Data log record count. Number of records in data log. seconds Data log start time. Data log end time. Data log minimum delta time. Minimum amount of time between logged values. This is used to throttle data entry into a data log. When a data value is logged, a subsequent update to the data value is not logged until the time specified by this value has elapsed. If additional updates are received during this time, the older values are discarded and are not stored in the data log. Time of receipt is ignored if the value of this configuration property is zero or invalid. Data log notification threshold. Specifies the percentage change in log level required to trigger an update to the Data Log Status (nvoStatus) output. percent Log record. Documents the format of a data log record. Not used as a CP. Data logs have variable sized records--unused fields are not present. Timestamp type. Specifies whether or not a timestamp is included, and if it is incljuded, specifies the format of the timestamp. Contents defined by timestamp_t. Log record type. Specifies the format of a data log record. Contents defined by log_record_t. Multiple tnput NV flag. Set to 1 if the functional block has multiple input NVs. Data log fan-in flag. Set to one if this input NV receives data from multiple data sources. Data log point status flag. Set to one if this data log record includes point status information. Data log record length. Number of bytes in the data portion of a data log record. Set to 0 if the record does not contain a data value. Timestamp. Timestamp Full timestamp. Only present if timestamp_type is TS_FULL. Offset timestamp Offset since last full timestamp. Only present if timestamp_type is TS_OFFSET. Data log member index. Functional block member number for the network variable input that received this update. Only present if mulitple_input is 1. Data log data source index. Index into the cpSourceAddress array. Only present if fan_in is 1. Data log record data. Data field for a data log record. Contents depend on record_type value. Unused bytes are not included. Data log status. Changed value for data log status. Only present if record_type is LR_LOG_STATUS. Data log data value. Data log value. Size depends on size logged value and is defined by data_length. Only present if record_type is LR_DATA. Data log old time Previous time after a time change. Only present if record_type is LR_TIME_CHANGE. Data log point status. Optional status for a data point value. Only present if point_status is 1. Data log access request. Data log access request message format. Not used as a CP. This request has a variable size--the timestamp field is only included with the get next record request. Data log access protocol version. Data log access protocol version number. Currently must be 1. Requested log number. The log number of the data log to be accessed. Logs are numbered from 1 to number_of_logs. Timestamp of last record fetched. The first record with a timestamp after this timestamp is returned. If this field is invalid, the first record in the data log is returned. Timestamp of last record fetched. The first record with a timestamp after this timestamp is returned. If this field is invalid, the first record in the data log is returned. Data log access response. Data log access response message format. Not used as a CP. This response has a variable size--unused fields are not included. Closest data log access protocol version. Closest data log access protocol version number supported by this device. Returned for LRC_VER_MISMATCH responses. Number of logs. Number of data logs in the device. Returned for LRC_BAD_LOG_INDEX responses. Log size. Capacity of a data log. Data log enable timestamp. Enables time stamping of each data value. When True, the data logger includes a timestamp of the receipt time for each value received by the data logger. Data log type. Specifies the method used to store data in a data log. Low limit delay The time limit during normal operation before the alarm air temp low alarm is recognized Low limit temperature The low alarm set point for the alarm air temp network variable Low limit 1 Enable Controls whether low limit 1 is in effect Low limit 2 Enable Controls whether low limit 2 is in effect Setpoint, illumination level The illumination level setpoint for the controller Maintenance date The date of last maintenance for the device Manual override time The maximum time that the controller will stay in a manual mode following the last request by a network variable input. Zero disables the timer. Manufacture date The date of manufacture for the device Manual allowed Provides a clock, with a manual time input, the possibility to permit manual time updating Master-slave operation Used to select master clock or slave clock, non-zero indicates this is master clock Maximum pre-positions The maximum number of pre-positions supported by a device Maximum defrost time Maximum time for defrost to run if terminated on temperature Defrost stop temperature The temperature at which to terminate defrost for objects set to terminate on temperature The maximum defrost time for defrost objects set to terminate on temperature Maximum discharge air cooling Setpoint for the maximum discharge air cooling Maximum discharge air heating Setpoint for the maximum discharge air heating Maximum duct static pressure Setpoint for maximum duct static pressure Maximum fan-in. Specifies the maximum number of data sources that may be connected to a network variable. The functional block determines data sources by examining the source address of each update. data sources Maximum flow The maximum flow Maximum heating airflow The maximum airflow setpoint of a VAV terminal while heating Setpoint for the operational high flow limit Unit maximum air flow Unit maximum airflow for dual duct VAV Terminal units Maximum Dim Voltage Maximum network variable length Maximum length of a type that may be assigned to the network variable Maximum output value The maximum value limit of the associated output network variable Maximum power. Power level at which the sunblind actuator detects a blocked motor and switches off automatically. Maximum pressure Setpoint for the operational high pressure limit Maximum privacy zones The maximum number of privacy zones supported by a device Maximum receive time The maximum time elapsed after the last update before the actuator adopts the default output The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables Maximum remote flow Setpoint for the operational high flow limit (remote sensor) Maximum remote pressure Setpoint for the operational high pressure limit (remote sensor) Maximum remote temperature Setpoint for the operational high temperature limit (remote sensor) Maximum return/exhaust fan capacity Setpoint for maximum return/exhaust fan capacity Maximum send time The maximum period of time between consecutive transmissions of the current value Maximum setpoint Either the maximum angle of rotation for an actuator or the maximum airflow for an actuator depending on actuator category Maximum stroke The maximum stroke limit Maximum supply fan capacity Setpoint for maximum supply fan capacity Measurement interval Time period used for a measurement seconds Minimum defrost time Minimum time for defrost to run if terminated on temperature Damper angle send on delta The minimum change in damper actuator angle required to be treated as significant Minimum delta CO2 level The minimum change in CO2 level required to be treated as significant Flow send on delta The minimum change in airflow required to be treated as significant Send on delta The minimum change required to force transmission of the output value Minimum delta relative humidity The minimum change in RH level required to be treated as significant Minimum delta temperature The minimum change in temperature required to be treated as significant Minimum discharge air cooling Setpoint for the minimum discharge air cooling Minimum discharge air heating Setpoint for the minimum discharge air heating Minimum duct static pressure Setpoint for minimum duct static pressure Minimum flow The minimum flow Minimum heating airflow The minimum airflow setpoint of a VAV terminal while heating Standby heating minimum air flow Heating or ventilated deck minimum flow of a dual duct VAV Terminal unit during occupied standby mode Setpoint for the operational low flow limit Minimum flow for standby The minimum flow through the VAV box in standby mode Unit minimum air flow Unit minimum air flow for dual duct VAV Terminal units Unit Heating Minimum Flow Minimum airflow setpoint of a single duct, or the unit minimum airflow setpoint of a dual duct VAV terminal when using a unit (local) heating source Standby unit minimum air flow Total unit minimum airflow for dual duct units during occupied standby mode Minimum outdoor air flow Setpoint for the default minimum outdoor air flow Minimum pressure Setpoint for the operational low pressure limit Minimum remote flow Setpoint for the operational low flow limit (remote sensor) Minimum remote pressure Setpoint for the operational low pressure limit (remote sensor) Minimum remote temperature Setpoint for the operational low temperature limit (remote sensor) Minimum return/exhaust fan capacity Setpoint for minimum return/exhaust fan capacity Minimum send time The minimum period of time between consecutive transmissions of the current value Minimum setpoint The minimum setpoint, such as minimum angle of rotation or minimum air flow Minimum stroke The minimum stroke limit Minimum supply fan capacity Setpoint for minimum supply fan capacity Mixed air low limit Setpoint for the mixed air low temperature limit Mixed air temperature Setpoint for the default mixed air temperature Heart beat, mode output The time that must pass without an update for mode definitions to be automatically retransmitted, zero disables Monitor Interval. This configuration property defines the interval over which statistics are collected and averages are calculated Name part 1 Part 1 of the name of the functional block to be used by optional user interface applications. May optionally used with SCPTname2 and SCPTname3. Must be implemented as a configuration network variable. Character encoding. Character encoding method Name part 2 Part 2 of the name of the functional block to be used by optional user interface applications. Must be used with SCPTname1 and may optionally be used with SCPTname3. This part is concatenated after part 1, and may optionally be followed by part 3. Must be implemented as a configuration network variable. Name part 3. Part 3 of the name of the functional block to be used by optional user interface applications. Must be used with SCPTname1 and SCPTname2. This part, if present, is concatenated with parts 1 and 2. Must be implemented as a configuration network variable. Neuron Identifier A unique 6-byte identifier for a CEA-709.1 / EN14908 device Night purge valve position Valve position in percent open for night purge Nominal air flow Value used in calculating the air flow in an airflow control actuator Heating nominal flow Nominal airflow volume of a hot or ventilation deck of a dual duct VAV terminal Nominal angle The nominal angle for an actuator Nominal motor frequency The nominal frequency of a motor Nominal motor speed The nominal speed of a motor in RPM Normal rotational speed The normal rotational speed in Hz Index of Functional Block Number of dampers Used to inform the controller if it is in a single or dual duct system Number of Digits on the Meter This configuration property is used for setting the total number of digits on the meter Number of output valves Used to inform the controller whether it is in a one-valve or two-valve system Network variable dynamic assignment Assigns a dynamic network variable to a functional block member Network variable index Network variable index within the device nv index Functional block index Index of the functional block to which the network variable is assigned fblock index Member number Member number of the functional block network variable member to which the network variable is assigned nv member number UNVT Flag Defines whether the NV is of SNVT (=0) or UNVT (=1) NV Declaration Index The member index from the profile Network variable type Network variable type for network variables that support changeable types NV usage The SCPTnvUsage CPs shall be used to indicate whether the NVs are in use by the loaded program Network configuration source The value of this field determines the source of the node's network configuration. Object major version number The major version number for the object Object minor version number The minor version number for the object Occupancy behavior Specifies mapping of scheduled occupancy values to primary occupancy states based on local occupancy inputs Invalid output value Primary occupancy value when the scheduled value is invalid (ob_nul) and a local occupancy condition is detected Occupied output value Primary occupancy value when the scheduled value is occupied (ob_occupied) and a local occupancy condition is detected Unoccupied output value Primary occupancy value when the scheduled value is unoccupied (ob_unoccupied) and a local occupancy condition is detected Bypass output value Primary occupancy value when the scheduled value is bypass (ob_bypass) and a local occupancy condition is detected Standby output value Primary occupancy value when the scheduled value is standby (ob_standby) and a local occupancy condition is detected Occupancy thresholds Specifies the minimum number of occupancy sensors that must report the same value to override a scheduled output value Occupied threshold Number of occupancy sensors that must be reporting occupied to report an occupied output when the current schedule specifies an occupied state; if the number of occupancy sensors reporting occupancy is below this value, the occupancy output is set to standby Standby to occupied override threshold Number of occupancy sensors that must be reporting occupied to report an occupied output when the current schedule specifies a standby state; if the number of occupancy sensors reporting occupancy is below this value, the occupancy output is set to standby Unoccupied to occupied override threshold Number of occupancy sensors that must be reporting occupied to report an occupied output when the current schedule specifies an unoccupied state; if the number of occupancy sensors reporting occupancy is below this value, the occupancy output is set to standby OEM label The label, programmed by the OEM, to identify the unit name Turn-off delay The length of time that the load remains energized after a change from ON to OFF has been received CO2 level offset Used to calibrate external hardware with additive offset after transformation Air flow offset Offset value used to calculate the active airflow setpoint by adding nciFlowOffset to nviAirFlowSetpt Relative humidity offset Temperature offset Hysteresis, auto mode on/off Sets the hysteresis for the level setpoint. Setting to zero disables automatic on/off switching Orientation The orientation angle of the display image (0 = landscape, 90 = portrait) Outdoor air enthalpy Setpoint for the outdoor air enthalpy economizer enable Outdoor air temperature Setpoint for the outdoor air temperature economizer enable Override behavior This parameter is used to define the behavior when an override request is received. Part number Manufacturer-defined part number string for the device Poll rate. Specifies the poll rate for each data source. When this value is greater than zero, the functional block polls each of the data sources identified in the source address array at the rate specified by this value. Power-up state The state of a light controller object after power-up or reset Primary default value The default output value when an area is occupied Command History Log of recent commands, with time stamp State History Log of recent status values, with time stamp File Indexes Indexes of first and last LonMark files where programs may be stored Program Name Name of currently loaded program Program Revision Revision number and date of currently loaded program Program Select Buffer Id where the currently loaded program is stored Source Location Location from where the current program was downloaded Pulse and Transformer Constant This configuration property is used to scale the raw pulse value to an energy-meter value Pump characteristic The basic characteristic data for a pump speedmax, pressmax, flowmax Maximum speed Maximum pressure at zero flow maximum flow at zero pressure Pump down delay The delay to use before starting the defrost Pulse-width modulation period The time period to be used in pulse-width modulation control strategy Power send on delta. The minimum change required to propoagate the output value Power-up delay The minimum period of time after power-up or re-establishment of communications before a control action takes place Chiller enable The default power-up and restart modes of the device when the default behavior selector is set to zero Minimum ramp-down time The ramp-down time of the device Minimum ramp-up time The ramp-up time of the device Randomization interval Specifies an interval around a scheduled time that is used by a scheduler to calculate a random event time. Used to reduce simultaneous startup and shutdown of many devices by multiple schedulers. Earliest time offset Latest time offset Reflection factor The internal gain factor for the measured illumination level Refrigerant glide Used to characterize the glide of the refrigerant used Refrigerant type Refrigerant name, A, B, C Refrigerant name array of 6 characters Constant A Constant B Constant C Register name The name of a utility data logger register device Return fan pressure Setpoint for the return fan static pressure Running hours alarm threshold level The alarm threshold for the running hours counter Running hours counter initialization The initial value of the running hours counter network variable Runtime Alarm This configuration property can be used to provide the alarm threshold for the run time counter output network variable Saturation delay Scan Time. Duration in which all devices are being queried Scene configuration Scene definition used to create a scene table. This SCPT defines the minimum entries required by the ISI profiles. May be used in combination with SCPTsceneTiming. Scene number used to uniquely identify a scene. A scene number to be recalled or learned is typically received from a SNVT_switch_2 or SNVT_scene input NV. Scene setting level Setting value that is applied when the scene specified by scene_number is recalled. Also used to set or specify a factor to be multiplied with the setting. % of full level Scene rotation angle Rotation angle that is applied when the scene specified by scene_number is recalled. Only applies to devices that support a rotation setting such as blinds. Unoccupied scene number. Scene to be activated when the scene specified by scene_number is active, and an unoccupied input is received. Scene color configuration Scene color definition used to supplement a scene table created with a SCPTscene array. This SCPT defines optional color scene table entries for the ISI profiles. When used, it must be used in combination with a SCPTscene array. Scene name. Name for a scene to be used by optional user interface applications. Used to create an array that supplements a scene table created with a SCPTscene array. Scene number The number of the first scene for the panel, other numbers are subsequent Numeric selector Scene offset The offset for the scene number when data is forwarded from primary to secondary Scene timing configuration Scene timing definition used to supplement a scene table created with a SCPTscene array. This SCPT defines the optional scene table entries for the ISI profiles. When used, it must be used in combination with a SCPTscene array. Scene fade time Time to ramp to a new setting. Fading starts after any delay specified by the delay_time field, so the total time to move to a new value is delay_time plus fade_time seconds. Scene delay time Delay time from the time a new scene is selected until any change is made to the light intensity or appliance state. Schedule Describes the attributes of a daily schedule definition Temporary flag Identifies a temporary schedule. Temporary schedules are deleted at the end of the day that they are active Schedule priority Specifies the priority for this schedule. Low priority values specify high priority, and high priority values specify low priority. Zero (0) is the highest priority and 255 is the lowest Time-value array index Identifies the starting entry of a list of time-value events in a SCPTscheduleTimeValue array. The end of the list is identified by the terminator field in the SCPTscheduleTime entry Schedule dates A range of dates with an optional qualifier that specifies when a schedule is active Schedule start Starting year for schedule Starting month for schedule Starting day for schedule Schedule end Ending year for schedule Ending month for schedule Ending day for schedule Month qualifier Months within the dates specified by the start and end dates Days qualifier Days within the dates specified by the start and end dates Schedule number Index into a schedule or schedule name array Exception schedule An event that overrides a daily schedule; typically used for special events Friday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Friday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Holiday or vacation schedule An event that overrides a daily schedule; typically used for holiday or vacation event Internal schedule Enable internal scheduling Monday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Monday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Schedule name Used to create an array of names for schedules defined by a SCPTschedule array or a SCPTscheduleDates array. Saturday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Saturday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Sunday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Sunday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Thursday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Thursday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Schedule time-value pair Specifies the time and value for a scheduled event Invalid flag Identifies an undefined schedule entry Terminator flag Identifies the last entry in a time-value list Hour Hours since midnight for a scheduled event Minute within the hour for a scheduled event Scheduler value Specifies the value to output when a time-value pair is active. The value must be mapped to a value that matches the type of the output network variable Tuesday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Tuesday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Wednesday schedule A structure containing an array of seven time-value pairs that specify the daily schedule for Wednesday; unused time-value pairs have an invalid value (31) for the hour; if two time-value pairs specify the same time, the first with a valid output value is used Alternate time source option flag Set to one if the device supports an alternate time source such as an interface to an NTP or SNTP server, GPS clock, or radio atomic-clock source General-purpose option flag Set to one if the general purpose output is supported; if zero, only the occupancy output is used Sunrise and sunset relative scheduling option flag Set to one if the scheduler supports sunsrise and sunset relative schedulign; set to zero if sunrise and sunset relative scheduling is not supported Scroll speed The scroll speed of the display image Secondary default value The default output value when the neighboring area is occupied Temperature sensor constant Calibration value for a duct temperature sensor Serial number Manufacturer-defined serial number string for the device Occupancy temperature setpoints The occupancy temperature setpoints for heat and cool mode Sluice-lock master/slave control Role of a device in a sluice-lock connection. A sluice-lock is an interlock mechanism between two entry/exit devices, or a sluice manager and several entry/exit devices, to ensure that only one single entry/exit device is opened at any point in time. Daytime alarm limit The daytime alarm limit sensitivity value for the fire initiator in percentage obscuration by smoke Daytime pre-alarm limit The daytime pre-alarm limit sensitivity value for the fire initiator in percentage obscuration by smoke Nighttime alarm limit The nighttime alarm limit sensitivity value for the fire initiator in percentage obscuration by smoke Nighttime pre-alarm limit The nighttime pre-alarm limit sensitivity value for the fire initiator in percentage obscuration by smoke Nominal sensitivity The nominal sensitivity value for the fire initiator in percentage obscuration by smoke Source address. Specifies a source address or element of an array of source addresses for and input to a functional block. Subnet ID. ANSI/CEA-709.1 subnet ID. Reserved. Set to 0. Applications must ignore this bit. Node ID. ANSI/CEA-709.1 node ID. The value 0 is invalid. Space humidification Setpoint for the default space humidification Standby rotational speed The standby rotational speed in Hz Maximum step The maximum step that the associated controller may take to approach the target level Step value, ramp or master fade The step value for up/down ramps or fade control Startup delay The time to delay after power-up, defrost, or pack fail Startup valve opening Maximum valve opening to use after power-up, defrost, or pack fail Summer time, start date and time The start of summer time for purposes of daylight-savings time, all zeros disables Sunrise time Time used for sunrise-relative scheduling; must be implemented as a configuration network variable; only the time fields are used for scheduling--the date fields indicate the date used for the configured time Sunset time Time used for sunset-relative scheduling; must be implemented as a configuration network variable; only the time fields are used for scheduling--the date fields indicate the date used for the configured time Super heat reference initialization Default value for the super heat target network variable Super heat reference maximum Maximum value for the target super heat network variable Super heat reference minimum Minimum value for the target super heat network variable Temperature offset for calibration Temperature hysteresis General-purpose temperature hysteresis differential between on-point and off-point Defrost termination setting The defrost termination condition Thermal rate of change/rise trip value The thermal alarm trip rate of rise Thermostat mode The thermostat control strategy Thermal alarm trip threshold Thermal alarm trip threshold for the initiator Time event entry Event or mode definitions to be transmitted if the time in the record is reached record type, hour, minute, event mode Type of time event record time event record type names hours minutes Event mode information event mode number Historical Period This input configuration network variable defines the period of time between transfer of a values to the historical register Time source Specifies the source of time Time zone descriptor Time zone of node (offset from GMT, start and end of DST) Response timeout The timeout for a controlling device to respond, during control permission request Translation table X Used in conjunction with Translation table Y to scale and linearize a value Valve-Plug Characteristic Table X This configuration property will be used in conjunction with the translation-table Y configuration property to create a translation table that dictates how to scale the flow with respect to the mechanical stroke Combination-Flow Characteristic Table X This configuration property will be used in conjunction with the translation-table Y configuration property to create a translation table that dictates how to scale the flow with respect to the valve capacity Translation table Y Used in conjunction with Translation table X to scale and linearize a value Valve-Plug Characteristic Table Y This configuration property will be used in conjunction with the translation-table X configuration property to create a translation table that dictates how to scale the flow with respect to the mechanical stroke Combination-Flow Characteristic Table Y This configuration property will be used in conjunction with the translation-table X configuration property to create a translation table that dictates how to scale the flow with respect to the valve capacity Update rate, time stamp The update rate of the master clock to the associated network variable Value name Used to create an array of value names for each of the values defined in a SCPTvalueDefinition array Name Nul-terminated name string of up to 22 characters. The nul terminator is not required if the string is 22 characters. array of 22 characters Valve flow characteristic Actual flow characteristic of the valve Valve Flow This configuration property can be used to provide the flow through an open valve at 1 bar differential pressure Nominal Valve Size This configuration property can be used to provide the nominal size of the valve body Valve operating mode The normal operating mode of the valve Valve Stroke This configuration property can be used to provide the stroke to fully open the valve Valve Type This configuration property can be used to provide the valve type Visible light output intensity Visible light output intensity specification of the device at 0 deg viewing angle candela Weekly schedule Identifies a schedule to be active for each day of the week Time-value index array Winter time, start date and time The start of winter time for purposes of daylight-savings time, all zeros disables Zone number The zone number for the device zone number